Firesense 1902415 Assembly / Care & Use Instructions - Page 6

Browse online or download pdf Assembly / Care & Use Instructions for Patio Heater Firesense 1902415. Firesense 1902415 17 pages.

Print Page

ASSEMBLY

Attach the Lower Post

you have tightened the bolts holding the Post Supports

to the Base

, align the holes in the Lower Post

holes on the tops of the Post Supports and insert a Large

Bolt

through the hole in the Post Support. Secure with a

Small Flange Nut

. Repeat this in the 5 remaining holes (6

holes total—2 for each Post Support piece). Hand tighten

initially then tighten with the Wrench

have been inserted.

Hardware Used: 6x Large Bolt

Attach Upper Post

two pieces of the post together.

Note: Bolts not needed to hold the posts in place.

Slide Tank Housing

Posts

and down over the Post Supports

Tank Housing on the Base

Attach

Assembly

. Insert 1

Washer

and into the hole on the top of the Head Assembly.

Tighten stud securely. Repeat with the other 2

Hardware Used:

to the Post Supports

with the

when all bolts

6x Small Flange Nut

to Lower Post

by screwing the

over the assembled Upper/Lower

to the top of the Head

through 1 Large Flat

3x Large Flat Washer

. Once

. Rest the