Firesense 62234 Instructions Manual - Page 5

Browse online or download pdf Instructions Manual for Heater Firesense 62234. Firesense 62234 6 pages. Sporty halogen space heater

Print Page

CARE AND MAINTENANCE

OPERATION

Connect the power cable to 12.5 amp supply that is located in a safe, dry area.

•

The switch on the heater is used to control the Heating. The (I) is on or 1000W and the (O) is OFF.

•

Although the patio heater is waterproof, do not use when raining or in wet conditions.

•

Always disconnect the power cable from the electrical supply when the patio heater is not in use.

CARE AND MAINTENANCE

•

Unplug the heater and let it cool completely.

•

To keep this unit clean, the outer shell may be cleaned with a soft, damp cloth. You may use a mild detergent if necessary.

After cleaning, dry the unit with a soft cloth.

•

DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater. This may cause

damage or deterioration to the surface of the heater.

•

Although the heater is outdoor approved, DO NOT immerse the heater in water for your safety.

•

Wait until the unit is completely dry before use.

•

Any maintenance or repairs including replacing the halogen tube should only be carried out by a qualified electrician or

by a recommended service center.

STORAGE

If the heater will not be used for a long period of time, store it in a cool, dry location when not in use. To prevent dust and dirt

build-up, use the original packaging to repack the unit.

TROUBLE SHOOTING

If this unit does not operate properly, please check the following before repair or service:

•

Check if the power cord is plugged into an electrical outlet; if not, plug in.

•

Check if electricity to the main fuse is working.

•

Make certain the power switches are turned on. If not, choose a setting.

SPECIFICATIONS:

•

Voltage Rating: 120V (60Hz)

•

Power Consumption: 1000W

•

Net Weight: 4.4kg / 9.7 lbs

•

Height: 65cm / 25.6in

•

Insulation Class I