Backyard Pro Butcher Series Instruction Manual - Page 3

Browse online or download pdf Instruction Manual for Mixer Backyard Pro Butcher Series. Backyard Pro Butcher Series 4 pages. Meat tenderizer motor
Also for Backyard Pro Butcher Series: Instruction Manual (11 pages), Instruction Manual (5 pages), Instruction Manual (5 pages), Instruction Manual (7 pages), Instruction Manual (11 pages), Instruction Manual (6 pages), Instruction Manual (6 pages), Instruction Manual (5 pages), Instruction Manual (4 pages), Instruction Manual (8 pages)

Print Page

ASSEMBLY INSTRUCTIONS

1. Assemble the Manual Tenderizer per the instructions that

came with the unit.

2. Remove the Handle from the Manual Tenderizer and set

it aside. The Handle will not be used when the motor is

attached.

3. Remove the two Screws and Washers from the handle side

of the Manual Tenderizer (FIGURE 1).

4. Screw the Adapter (part 2) into the Auger Shaft of the

Manual Tenderizer and tighten the Adaptor Set Screw

(FIGURE 2).

5. Align the motor bracket holes with the Motor (part 1), and

using the Short Hex Bolts, Spring and Flat Washers (parts 4,

5, 6) fasten the Motor Bracket (part 3) to the Motor

(FIGURE 3).

6. Align the Motor and Bracket together with the side of the

Tenderizer, then insert the Motor Shaft into the Adapter

(part 2).

7. Once aligned, fasten the Motor and Bracket to the

tenderizer in the preexisting leg screw holes using Long

Hex Head Bolts (part 7) and Flat Washers (part 6). Using the

remaining Short Hex Bolt (part 4) and Flat Washer (part 6),

fasten the Motor Bracket to the lower leg hole (FIGURE 4).

8. The 2-Speed Motor is now fully assembled and ready for

use. Be sure to read and understand the instructions that

came with your tenderizer for safe operation.

Motor

Bracket

FIGURE 3

FIGURE 4

Tenderizer

Screws &

Washers

FIGURE 1

Set

Screw

Shaft

Adapter

FIGURE 2