Fireside mantels & surrounds Kenwood Flush Assembly Installation Manual

Browse online or download pdf Assembly Installation Manual for Fireplace Accessories Fireside mantels & surrounds Kenwood Flush. Fireside mantels & surrounds Kenwood Flush 6 pages.

Print Page

Kenwood Flush mantel

Assembly / Installation Guide

These instructions apply only to the cabinetry and facing material that will surround the firebox.

PLEASE SEE THE FIREPLACE MANUFACTURER'S INSTALLATION INSTRUCTIONS TO ENSURE THAT ALL CLEARANCE AND

INSTALLATION REQUIREMENTS ARE BEING MET.

Kenwood mantel with optional base.

Note: Using the base will raise the fireplace by 9-1/4" above

finished floor level. All dimensional requirements of fireplace

installation should be ajusted accordingly.

For field finishing the following

two products have been

approved for use on this

product:

1. Lacquer - Sherwin Williams

2. Paint - Sherwin Williams

All other products may result

in discoloration or undesired

results.

www.fireplaces.com

Notice !!

"Wood Classics A68F90".

"Duration Home A98W151

Interior Latex Paint".

PLEASE READ

Kenwood mantel without optional base.

• Improper installation,

adjustment, can cause injury

or property damage. For

assistance or additional

information, consult a

qualified installer, service

agency, or the gas supplier.

• Comply with all minimum

clearances to combustibles

as specified in firebox manual.

Failure to comply may cause

house fire.

Warning !!

6200-002

REV. A

04.16.2009