Firestone AIRIDE 2639 Installation Instructions Manual - Page 7

Browse online or download pdf Installation Instructions Manual for Air Compressor Firestone AIRIDE 2639. Firestone AIRIDE 2639 20 pages.

Print Page
Use as template to
mark drill locations.
2639 Installation Instructions
IF YOU ARE USING THE OPTIONAL FIRESTONE AIR ACCESSORY MOUNTING
KIT, SKIP THIS STEP AND REFER TO THE MOUNTING KIT'S INSTRUCTIONS.
Drill within reach of the ground wire
ring terminal on body or frame of
vehicle. AIR ACCESSORY MOUNTING
KIT CANNOT BE USED AS A
GROUNDING LOCATION FOR THE AIR
COMPRESSOR.
9499 AIR COMPRESSOR
Use as template to
mark drill locations.
9535 ECU
DRILL HOLES FOR AIR COMPRESSOR AND ECU
CHECK SURROUNDING AREA AND BACK SIDE OF MOUNTING
LOCATION TO AVOID DRILLING INTO EXISTING LINES OR WIRING.
BLACK
GROUND
WIRE
7/32"
OPTIONAL ECU MOUNTING
9535 ECU
1
Using the Air Compressor
and ECU as templates, mark
a punch or marking tool.
2
Mark Air Compressor
ground wire fastening
location within reach of the
ground wire ring terminal.
3
Drill 7/32" diameter holes.
Remove any burrs and
debris from drill holes.
ASSURE THAT YOU INSTALL THE
AIR COMPRESSOR AND ECU CLOSE
ENOUGH SO THE CONNECTORS ON
THE WIRE HARNESS WILL REACH
THEM BOTH.
If there is no other
mounting option,
use two Large Nylon
Ties to secure ECU to the
location determined in
planning the install
section. Route the Nylon
Ties under the ECU and
around the mounting
location.
2
6