Bacmove HMI5-TP7 Quick Manual - Page 5
Browse online or download pdf Quick Manual for Controller Bacmove HMI5-TP7. Bacmove HMI5-TP7 6 pages. Bacnet touch panel
Print PageNetwork Settings
Configure the network using one of the following options:
1. Ethernet with DHCP: This is the default, so nothing further to do. Note that Ethernet will not
work if Wi-Fi is enabled.
To see the allocated IP address, press "Ethernet" under "Wireless & networks", and the IP
Address is shown.
2. Ethernet with Static IP Address:
▪
Press " Ethernet" under " Wireless & networks ".
▪
Toggle "Ethernet" to "On".
▪
Click "Static IP".
▪
Enter the desired network setting.
▪
Click "Ok".
3. Wi-Fi with DHCP:
▪
Press " Wi-Fi" under "Wireless & networks".
▪
Toggle "Wi-Fi" to "On".
▪
Click the chosen network and enter the Wi-Fi password.
▪
Click "Connect".
To see the allocated IP address, click the three dots at the top right and on "Advanced".
4. Wi-Fi with Static IP Address:
▪
Press " Wi-Fi" under "Wireless & networks".
▪
Toggle "Wi-Fi" to "On".
▪
Click the chosen network and enter the Wi-Fi password.
▪
Tick "Advanced options".
▪
Scroll down and change "IP settings" to "Static".
▪
Enter the desired network settings.
▪
Click "Connect".
HMI5-TP7 Revision 0002