Firestone 2227 Manual

Browse online or download pdf Manual for Control Unit Firestone 2227. Firestone 2227 4 pages. Level command kit

Print Page

PERFORMANCE SUSPENSION PARTS

NSTALLATION INSTRUCTIONS

Congratulations on your purchase of a new Level Command

kit. This kit was designed to provide inflation control of your

air helper springs. This kit will be an asset to your vehicle,

meeting nearly all of your air supply needs.

Please take a few minutes to read through the instructions,

identify the components, and learn how to properly install your

Level Command kit.

OTE

The Level Command kit can be used with all air helper

spring products. If you are installing an air suspension system,

do not install the air line tubing to the air springs as stated in

the suspension system instruction manual. If you are adding

the Level Command kit to an existing air suspension system,

you will need to deflate the air springs and remove the air line

tubing.

ARTS LIST

SINGLE AIR CONTROL PANEL

COMPRESSOR

RELAY HARNESS

30 FT. AIR LINE TUBING

STRAIGHT FITTING

T-FITTING

200

psi

EVEL

9285

9307

3055

3025

600

400

120

800

1000

kPa

PSI

150

OMMAND

OTE ON

ONNECTING THE AIR LINE TUBING

Cut the air line tubing as squarely as possible. To connect

the air line tubing to the fittings, push the tubing into the fittings

as far as possible. If for any reason the tubing must be removed,

first release the air pressure from the air helper spring. Push the

collar toward the body of the fitting and the pull out the tubing.

To reassemble, make sure the tubing is cut squarely and push

the tubing back into the fitting.

OOLS REQUIRED

• 3/16"

DRILL BIT

• 1/4"

DRILL BIT

• W

IRE CRIMPER

STRIPPER

• P

HILLIPS SCREW DRIVER

• (2) 7/16"

WRENCHES

10 -32 x 1" MACHINE SCREW

10 -32 LOCK NUT

#10 FLAT WASHER

RING TERMINAL

WIRE CONNECTOR

NYLON TIE

2097 / 2227

• 3/8"

DRILL BIT

• P

OWER DRILL

• P

LIERS

• U

TILITY KNIFE

• C

ENTER PUNCH