Firetide FWB-205 User Manual - Page 13

Browse online or download pdf User Manual for Network Router Firetide FWB-205. Firetide FWB-205 17 pages.

Print Page

Appendix A

Wireless Interface

Model

Use

FWB-205

Outdoor, Worldwide, Radio 2: 5 GHz

Bands

Frequency (GHz)

802.11a

5.15-5.25

802.11n

5.25-5.35

5.725-5.825

4.9-5.090

4.94-4.990

5.470-5.725

Bands (GHz)

802.11a 5.725-5.825 UNII-3

802.11n

5.725-5.825 UNII-3

5.470-5.735 UNII

5.25-5.36 UNII-2

5.15-5.25 UNII-1

Supported Data Rates & Standards

• 802.11a 6/9/12/18/24/36/48/54Mbps

• 802.11a Capable of switching to 1⁄4 and 1⁄2 rates for 4.940 –

4.990 GHz Public Safety Band

• 802.11g 6/9/12/18/24/36/48/54Mbps

• 802.11n 6.5/13/19.5/26/65/130 (20MHz LGB)

7.2/14.4/21.7/28.9/72.2/144 (20MHz SGB)

13.5/27/40.5/54/135/270 (40MHz LGB)

15/30/45/60/150/300 (40MHz SGB)

• Network Standards: IEEE 802.11a/d/e/f/h/i/n

• Security: WPA; 64/128/256 w/TKIP, AES

Power

• 48 VDC via DC connecter or 802.3af PoE

Appendix B

Preliminary Version 2.0

FWB-205 Specifications

Restrictions

Japan only

US Public Safety

ETSI 301.893, U-NII

Max TX Power

20 dBm

17 dBm

Reset Procedure

Firetide FWB-205s may be reset to factory parameters. This is useful when returning a unit from

field service or in recovering a unit you cannot communicate with. To reset a unit, apply power and

wait for the unit to fully boot. This takes 60 to 90 seconds. Use a paperclip to press and hold the

reset button for 15 seconds. Wait for the units to reboot before removing power.

When a unit has been reset, it forgets the country code setting and operates at low power until

the country code is re-established. Units that are already installed in the field are unlikely to com-

municate with each other after reset, due to the low power setting. You must connect to each unit

in turn and set the country code.

Environmental

• Humidity (non-condensing): 10% to 90%

• Storage humidity (non-condensing): 5% to 95%

• Maximum altitude 15,000 feet (4600 meters)

Network Port

• One 10/100/1000 Mbps Ethernet port with weatherproof con-

nector

• IEEE 802.3, 802.3u compliant

• CSMA/CD 10/100/1000 autosense

Enclosure

• Cast aluminum NEMA-4X/IP66 enclosure

• Six N-type antenna connectors

• Weatherproof 48VDC power connector

• Weight: 3.75 lbs (1.7 Kg) with bracket

• Dimensions: 8.2" x 8.6" x 2" (205 x 214 x 100 mm)

Security, Authentication and Encryption

• 802.11i, WPA2

• 40-bit, 104-bit WEP keys

• SSID suppression

Management and Configuration

• Built-in web-based management

• Remote firmware upgrade

Network Ports

• One 10/100/1000 autosense Base-T port

• IEEE 802.3,802.3 at based PoE

Warranty

• Hardware: one year limited warranty

• Software: 90 days limited warranty

Firetide. Reliable Connectivity Anywhere 13