Firetide FWB-205 User Manual - Page 2

Browse online or download pdf User Manual for Network Router Firetide FWB-205. Firetide FWB-205 17 pages.

Print Page

Chapter 1. Installation

Figure 1.

FWB-205 Kit Contents

Firetide FWB-205 Wireless Bridge User Guide

The FWB-205 Kit is shown in Figure 1. Each kit includes two radio modules, two MIMO antennas,

RF cables, Ethernet PoE injector/powersupplies, and mounting hardware.

Installation requires these tools:

• 1/2-inch open-end wrench

• 7/16-in open-end wrench

• 3/8-inch open-end wrench

• Phillips screwdriver

• Channel-lock or slip-joint pliers

• RJ-45 crimping tool and male plug

• Waterproofing tape or mastic for RF connections.

The assembly must be grounded. If the mast is not already properly grounded, you will need ap-

propriate grounding hardware. Consult local codes.

The FWB-205 units have three antenna connectors for each radio. Each FWB-205 unit should

be installed with its antenna on a sturdy pole or mast. It does not matter whether you install

the antenna first or the radio unit first. In all cases, antennas should be installed by a qualified

professional. Outdoor installations MUST have code-approved grounding and lightning-protection

systems.

January 2010