CALECTRO eSENSE Manual For Installation
Browse online or download pdf Manual For Installation for Transmitter CALECTRO eSENSE. CALECTRO eSENSE 3 pages. Co2 transmitter
Print Page
Manual for Installation
0$$
'
®
CO
transmitter
2
®
®
06(16(
06(16(
General
®
06(16(
(sensor for wall mounting) is designed to measure
The IAQ-sensor product
) in rooms. Option 'displays the measured CO
carbon dioxide (CO
value in ppm (parts-
2
2
per-million) on the LCD.
The units are designed for connecting to Direct Digital Control (DDC) with 0-10V or
2-10V signal inputs. The two parallel signal outputs OUT1 (0-10V) and OUT2 (2-10V) give
linear signal voltages corresponding to the measuring range 0-2000 ppm carbon dioxide.
The 2-10V output also indicates the status by setting the output voltage to 1V when the
sensor self diagnostics detects any error.
To open the wall mounted housing
Figure 1. . Closed housing seen from above.
The housing is opened by pressing a screw
driver on the locking hook. The locking hook is
then released.
1 av 4
EM_eSENSE_standard_April'03