AERA ZQ 032 Instruction Manual - Page 7

Browse online or download pdf Instruction Manual for Steam Cleaner AERA ZQ 032. AERA ZQ 032 12 pages.

Print Page

USE OF ACCESSORIES

CAUTION!

To avoid inadvertently pressing the steam delivery

button while changing accessories, the device must

be always switched off and unplugged! Since the

device parts remain very hot due to the hot steam,

allow these to cool for about 5 minutes before

changing the parts!

Use of the handle without accessories

The handle can be used without additional

accessories to steam surfaces and objects.

Application area::

• Removing creases from textiles. To do so, steam

the textiles from a distance of approx. 30 cm.

• Steam dusting. To do so, apply steam to a

duster for a short time and then use the latter to

wipe off the surfaces to be cleaned.

Use of the floor wiper

The floor wiper is designed to clean heat- and

damp-proof floor coverings, including e.g.:

• Cleaning of stone, tiled and PVC floors.

• Cleaning of sealed wooden and parquet

flooring.

The floor wiper can be attached to the handle using

the two extension pipes.

• To connect the extension pipes together and

with the handle, press the adjustment knob so

that both parts can be fitted together.

• Insert the extension pipe into the adapter piece

of the floor wiper.

• If the adapter piece becomes detached from the

floor wiper, reinsert the former into the opening.

Be careful when doing so to ensure that the flat

section of the nozzle must be directed toward

the side of the frame with the measuring stick.

After inserting, turn through 90°.

• To remove the parts, repeat the previous steps

in reverse, i.e. by pressing the adjustment knob

and disengaging the parts from each other

again.

30777-English_2 .indd 21

27/2/07 9:28:47 AM