Alcolock LR max Instruction Manual - Page 9
Browse online or download pdf Instruction Manual for Tools Alcolock LR max. Alcolock LR max 15 pages. Alcohol interlock
Print Page
5. While blowing you
Wait...
6. The result of the breath alcohol test
will be indicated in three ranges with
messages and actions as outlined below:
a. If no alcohol is
Start Engine
Cancel
b. If alcohol is detected
Caution
Start
[This is an optional feature to be set by the
jurisdiction.]
Drive Safely
INSTRUCTION MANUAL
will hear a click, DO
NOT stop blowing,
continue until the tone
ends. The handset will
display Wait... as the
breath sample is being
analyzed.
detected, the status
light will be solid green
to indicate PASS result
and the handset will
display Start Engine.
You may start the
vehicle engine within
the prescribed time
period, otherwise the
handset will revert to
Ready for Test.
below the FAIL set
point, the status light
will be solid amber
and the handset will
display Caution.
You must acknowledge
that alcohol has been
detected by pressing
the bottom navigation
button before starting
the vehicle engine.
When the device
detects the engine
running, the status
light will be solid green
and the handset will
display Drive Safely.
You may now drive the
vehicle.
c. If alcohol is detected
Lockout
xx:xx
You may NOT start the vehicle engine.
Wait for countdown timer to end and the
handset to display Ready for Test.
WARNING! Do not attempt another breath
test until you are certain that your breath
alcohol concentration is below the FAIL set
point. A second or subsequent FAIL test result
will cause another lockout period and may be
a program violation.
Performing a retest
Additional breath tests are required at random
time intervals to ensure that the driver has
not consumed alcohol since the vehicle was
started.
1. The status light will be
Retest
WARNING! Failure to provide a retest breath
sample may cause a recall for service and a
program violation.
2. Perform the breath test (refer to the
section Performing a test).
3. Observe the message displayed on the
handset:
a. If the status light is
Drive Safely
at or above the
FAIL set point, the
status light will be
solid red and the
handset will display
Lockout xx:xx (min)
to indicate the wait
time before attempting
another breath test.
flashing green and the
handset will display
Retest.
You must provide
an accepted breath
sample within the
prescribed time period.
solid green and the
handset displays
Drive Safely, no
alcohol was detected
and you may continue
to drive the vehicle.
9