3Com AirProtect Sentry 5850 Quick Start Manual - Page 6
Browse online or download pdf Quick Start Manual for Network Hardware 3Com AirProtect Sentry 5850. 3Com AirProtect Sentry 5850 15 pages. Secure converged networks enterprise edition
Also for 3Com AirProtect Sentry 5850: Datasheet (4 pages), Product Manual (15 pages)
Print Page
The figures below show a cable being routed through the large opening in the cradle and
then the cradle being mounted to a wall.
3
Connect the Ethernet cable (for power and network connection) to the port on the rear of
the Sentry.
4
Twist the Sentry onto the mounting bracket.
Tabletop Mounting
To install the Sentry on a flat surface such as a table or desktop:
1
Remove the backing from the four rubber feet and attach them on the bottom of the Sentry.
2
Place the Sentry on the table.
3
Connect the Ethernet cable (for power and network) to the port on the rear of the Sentry.
5. Connecting Power
The Sentry can be powered by the following methods:
•
By Power Over Ethernet (PoE) supplied over the LAN by a 802.3af PoE compliant device such
as a switch or hub.
•
By PoE supplied by a PoE injector (not included).
Power Over Ethernet (PoE) from the LAN
To power the Sentry using PoE provided by a switch or other 802.3af compliant device, simply
plug the network cable from the device into the Sentry's Ethernet port.
Sentry
Routing a cable
Wall-mounting the cradle
PoE Switch/Hub
6