ALcom Lifestyle 1900 User Manual

Browse online or download pdf User Manual for Cordless Telephone ALcom Lifestyle 1900. ALcom Lifestyle 1900 2 pages.

Print Page

TECHNICAL DETAILS

Standard

Frequency

USER GUIDE

Operating range

Lifestyle 1900 system

Operating time

Digital Cordless Telephone

Temperature range

Electrical power

Caution

Risk of explosion if battery is replaced by an incorrect type

Dispose of used batteries according to the instructions.

CLEANING AND CARE

Do not clean any part of your Lifestyle 1900 system with benzene, thinners or other

solvent chemicals this may cause permanent damage which is not covered by the

Guarantee.

THIS EQUIPMENT IS NOT DESIGNED FOR MAKING

When necessary, clean it with a damp cloth.

EMERGENCY TELEPHONE CALLS WHEN THE POWER

Keep your Lifestyle 1900 system away from hot, humid conditions or strong

sunlight,

and don't let it get wet.

FAILS. ALTERNATIVE ARRANGEMENTS SHOULD BE

Every effort has been made to ensure high standards of reliability for your

MADE FOR ACCESS TO DIAL EMERGENCY SERVICES.

Lifestyle 1900 system. However, if something does go wrong, please

repair it yourself

Before operating this set,

please read these instructions carefully.

To use your handset and base together, you must be able to establish a radio link

GETTING TO KNOW YOUR PHONE

between them. The signal between the handset and the base is in accordance

3.1

Handset Overview

with the normal standards for a DECT phone: Maximum range up to 300 metres

outdoors or 50 metres indoors.

The signal range may decrease if there is any large metal object between the

In idle mode:

Press to access the call list

handset and the base, such as a refrigerator, a mirror, a filing cabinet, metallic

In menu mode:

doors or reinforced concrete. The signal strength may also be reduced by other

Press to scroll up the menu items

In Phonebook list / Redial list /

solid structures like walls, or by other radio or electrical interference.

Call List:

INSTALLING YOUR PHONE

Press to scroll up the list

During a call:

2.1

Connecting the base station

Press to increase the

earpiece volume

1) Plug the power supply

and line cord

into

During ringing:

Press to increase the ringer volume

the base station.

2) Plug the power adapter into a 230Vac,

LEFT SOFT KEY(MENU/OK)

50Hz mains socket,

and the line cord into your

In idle mode:Press

telephone line socket.

to access the main menu

3) Always use the cables provided in the box

In sub-menu mode:

Press to confirm the selection

Warning: Use only the provided adaptor, using

During a call: Press to access

other power supplies may cause a hazard.

Intercom/Phonebook/ Redial

List/ Call List

Warning: Install the base unit in a position where the mains adapter plug

will reach an easily accessible mains socket. Never try to lengthen the

mains power cable.

TALK ON

Note: The base unit needs mains power for normal operation, not just for

In idle / predialing mode:

Press to make a call

charging the handset batteries.

In Redial list / Call List /

2.2

Installing and charging the batteries

Phonebook

list

1) Place the supplied battery into the battery

Press to make a call to the

display

ed entry in the list

compartment and plug it in to the socket.

During ringing:

Use only the battery type provided.

Press to answer a call

Position the battery compartment cover over the batteries

and slide up to click into place.

SPEAKERPHONE

3) Put the handset on the base and charge for

During a call:

15 hours before using the handset for the first time.

Press to turn on / off the speakerphone.

The handset will give a beep when it is properly placed on the base or charger.

Call List / Phonebook entry :

Press to make a call with speakerphone

If you have a Broadband line

During ringing:

Press to answer a call with speakerphone

If you connect your telephone to a line with

a broadband connection, you will need to

insert a micro-filter between the telephone

and the telephone line, otherwise you may get

interference between the telephone and the broadband,

which could cause problems.

In a home with broadband, every telephone must have a micro-filter connected,

not just the one at the telephone point that your modem is connected to.

If you need more broadband micro-filters, contact your broadband supplier.

USING YOUR PHONE

4.3

End a Call

During a call press <TALK OFF> to end the call.

4.1

Make a Call

4.1.1

Preparatory Dialing

Put the handset on the base station or charger to end the call.

Enter the phone number and press <TALK ON> / to

connect to the line and

make a mistake, press <C>

4.4

Adjust Volume

dial the number. When entering the number, if you

to delete digits.

There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for the earpiece

volume.

4.1.2

Direct Dialing

During a call:

Press <TALK ON> to connect to the line and then

enter the phone number.

ress <UP/DOWN> to select volume 1-5. The current

(Note: if you enter a wrong digit you cannot correct it with the <C> key.)

When you end the call, the setting will remain at the last selected level.

4.1.3

Call from the phonebook

Press <PHONEBOOK> to access the phonebook and press <UP/DOWN> to

4.5

Mute a Call

select the desired phonebook entry.

You can talk to someone nearby without letting the caller hear you during a call.

Press <TALK ON> to dial out the selected phonebook entry.

During a call:

Note: You can also access the phonebook by pressing <MENU/OK>, <DOWN>,

Press <C> to mute the microphone and "MUTED" will display on the LCD.

Your caller cannot hear you. Press <C> again to unmute the microphone.

Note: The alphanumeric keys provide a short-cut to find entries beginning with

4.6

Turn off

the corresponding letters.

In idle, press and hold <HASH/#> to turn off the handset ringer. The "RINGER

4.1.4

Call from the Call List (only available with Caller Display)

OFF"

icon is displayed on the LCD.

Press <UP> to access the Call List and press <UP/DOWN> to select the desired

Note: The display will still flash the Call icon and show CALL or the Caller Display

Call List entry.

number, when there is an incoming call, even if the ringer is turned off

Press <TALK ON> to dial out the selected Call List entry.

To turn the ringer back on, press and hold <HASH/#> again.

Note: You can also access the Call List by pressing <MENU/OK> twice.

4.7

Turn on the Keypad Lock

4.1.5

Call from the redial list

In idle, press and hold <STAR/*> to turn on the keypad

Press <DOWN> to access the redial list and press <UP/DOWN> to select the

LOCK"

icon is displayed on the LCD.

desired redial number.

Note: You can still use <TALK ON> to answer a call

Press <TALK ON> to dial out the selected redial number.

when the

4.1.6

Call timer

To turn the keypad lock off, press and hold <STAR/*> again.

Your handset automatically times the duration of every call.

4.8

Redial the last number

The call timer is displayed as soon as you answer a call or 15

seconds after

You can redial any of the 5 last numbers called. If you have stored a name in

dialling

and remains on the screen

for 5 seconds after

the end of the call.

the phonebook to go with the number, the name will be displayed instead.

It is shown in hours, minutes and seconds

format (HH:MM:SS).

The most recent last number will display at the top of the redial list.

4.2

Answer a Call

4.8.1

Redial a Number from the Redial List

If the handset is not on the charging cradle:

1. In idle mode, press <DOWN> to access the redial list.

When the phone rings, press <TALK ON> to answer a call.

Note: If the redial list entry shows a name, press <Hash/#> to view the number

Note: If AUTO ANSWER is set to ON, then lifting the handset off the base or

of this entry.

charger will answer the call automatically, and no buttons need to be

2. Press <UP/DOWN> to browse the redial list.

pressed.

3. Press <TALK ON> to dial to the selected redial number.

Note: If there are no numbers in the redial list, the display shows " EMPTY " .

Digital Enhanced Cordless

Telecommunication (DECT)

1 IMPORTANT SAFETY INSTRUCTIONS...........................................................

1.8 Ghz

Up to 300m outdoors; up to 50m indoors

2 INSTALLING YOUR PHONE ............................................................................ 5

Standby: 100 hours, Talking: 10 hours

2.1 C ONNECTING THE BASE STATION .......................................................................... 5

Battery charge time:15 hours

2.2 I NSTALLING AND CHARGING THE BATTERIES ...................................................... 5

Operating 0 C to 40 C

, Storage -20 C to 60 C

3 GETTING TO KNOW YOUR PHONE ................................................................ 6

Base unit:

3.1 H ANDSET O VERVIEW ................................................................................................ 6

HONR – ADS-3V-06 06018 GPB / ADS-3V-06 06018 GPG

3.2 B ASE S TATION O VERVIEW .....................................................................................

input 100-240VAC 50/60Hz 100mA, output 6VDC 300mA

D ISPLAY I CONS AND S YMBOLS ............................................................................... 7

M ENU S TRUCTURE ....................................................................................................

TenPao - S002CV0600030 / S002CB0600030

T EXT AND D IGIT E NTRY T ABLE ................................................................................ 9

input 100-240VAC 50/60Hz 100mA, output 6VDC 300mA

3.5.1

LATIN C

HARACTER S ET ......................................................................................... 9

Charger unit:

3.5.

2 P LISH CHARACTER SET......................................................................................

HONR – ADS-3V-06 06018 GPB / ADS-3V-06 06018 GPG

3.5.

NORWEGIAN CHARACTER SET............................................................................ 10

input 100-240VAC 50/60Hz 100mA, output 6VDC 300mA

3.5.

4 GREEK CHARACTER SET.....................................................................................

TenPao - S002CV0600030 / S002CB0600030

input 100-240VAC 50/60Hz 100mA, output 6VDC 300mA

4 USING YOUR PHONE ......................................................................................1

Battery Information

GPI – VTHC043C02, Type NiMH (Rechargeable battery)

4.1 M AKE A C ALL ............................................................................................................. 1

Voltage Rating

400mAh 2.4V AAA Size Pack

4.1.1 P REPARATORY D IALING .........................................................................................1

BYD- H-AAA400BX2, Type NiMH (Rechargeable battery)

4.1.2 D IRECT D IALING .......................................................................................................1

Voltage Rating

400mAh 2.4V AAA Size Pack

4.1.3 C ALL FROM THE PHONEBOOK ...............................................................................1 1

4.1.4 C ALL FROM THE C ALL L IST

CORUN- Ni-MHAAA400*2, Type NiMH (Rechargeable battery)

4.1.5 C ALL FROM THE REDIAL LIST

Voltage Rating

400mAh 2.4V AAA Size Pack

4.1.6 C ALL TIMER ..............................................................................................................1

4.2 A NSWER A C ALL ....................................................................................................... 1

4.3 E ND A C ALL ................................................................................................................ 1

4.4 A DJUST E ARPIECE V OLUME .................................................................................... 1

4.5 M UTE A C ALL ............................................................................................................. 1

4.6

TURN OFF HANDSET RINGER

4.7 T URN ON THE K EYPAD L OCK ................................................................................... 1

4.8 R EDIAL THE LAST NUMBER ..................................................................................... 1

4.8.1 R EDIAL A N UMBER FROM THE R EDIAL L IST .........................................................1

4.8.2 S TORE A R EDIAL N UMBER INTO THE P HONEBOOK ............................................1

4.8.3 D ELETE A R EDIAL N UMBER ....................................................................................1

4.8.4 D ELETE

ALL REDIAL LIST ENTRIES

4.9 F IND THE H ANDSET ................................................................................................... 1

4.10 M AKE AN I NTERNAL C ALL(FOR MULTI-HANDSET VERSIONS ONLY ) ................ . 1

4.10.1 I NTERCOM A NOTHER H ANDSET ..........................................................................1

do not try to

4.10.2 C ALL A LL H ANDSETS .............................................................................................1

consult your supplier or the Helpline.

4.10.3 T RANSFER AN E XTERNAL C ALL TO ANOTHER HANDSET ................................1

4.10.4 M AKE A 3- WAY C ONFERENCE C ALL ....................................................................1

3.2

Base Station Overview

PAGE

Press the Page button on the base

RIGHT SOFT KEY(CLEAR/BACK/MUTE/INTERCOM)

station to page your handset(s).

In main menu mode: Press to go back to idle screen

In sub-menu mode: Press to go back to previous level

It will ring for approximately 60 seconds.

In sub-menu mode: Press and hold to go back to idle screen

Press and hold to put base into registration mode.

In editing / predialing mode: Press to clear a character / digit

In editing / predialing mode:

CHARGING CRADLE

Press and hold to delete all the characters / digits

3.3

Display Icons and Symbols

During a call: Press to mute/ unmute the microphone

In idle mode:Press to intercom another handset

The LCD display gives you information on the current status of the telephone.

TALK OFF

During a call: Press to end a call and go

back to idle screen

In menu / editing mode: Press to go back

Scroll up / down the menu items / Phonebook list / Redial list / Call List

to previous menu

In idle mode:

Steady when the handset is in range of the base. Flashes when out of

Press and hold to power off the handset

range of the base or not registered to the base.

In idle mode (when the handset is powered

off): Press and hold to power

on the hands

Steady when an intercom call is in progress.

Flashes when there is an incoming internal call.

Indicates a call is in progress on that handset.

DOWN

Indicates that the

handset

In idle mode:Press to access the redial list

In menu mode:

Press to scroll down the menu items

Steady when an alarm is set. Flashes when the alarm is sounding.

In Phonebook list / Redial list / Call List:

Press to scroll down the list

Indicates that the keypad is locked.

During a call:

Indicates when you have a new Voice Mail message.

Press to decrease the earpiece volume

During ringing:

(This function needs the network support and not available

Press to decrease the ringer volume

in Singapore.)

RECALL(also called FLASH)

Indicates when the battery is fully charged.

When you get a busy line, press R button

to get a new dial tone.

Whole icon flashes when the battery s charging.

Press R button to answer call waiting line.

Internal block icon flashes when the battery is in final charging stage.

(second call) press R button again to

get back to the first line.

Indicates when the battery needs charging.

Flashes when low battery power level is detected.

4.8.2

Store a Redial Number into the Phonebook

1. Follow Steps 1 and 2 in section 4.8.1.

2. Press <MENU> and <UP/DOWN> to select ADD TO PB.

3. Press <OK> and then enter the name you want to use in the phonebook.

4. Press <OK> and then modify the number, if necessary.

5. Press <OK> to show <MELODY 1>.

6. Press <UP/DOWN> to browse the ringtone list. The respective ringtone will

be played when browsing the ringtone list. (Note: the selected melody will

only be played if you subscribe to Caller Display and the incoming number

setting is shown.

matches the stored number.)

7. Press <OK> to confirm, and the entry will be stored.

4.8.3

Delete a Redial Number

1. Follow Steps 1 and 2 in section 4.8.1.

2. Press <MENU> and <UP/DOWN> to select DELETE.

3. Press <OK> to confirm, and the entry will be deleted.

the

Handset Ringer

4.8.4

Delete all Redial List entries

1. Follow Steps 1 and 2 in section 4.8.1.

2. Press <MENU> and <UP/DOWN> to select DELETE ALL

3. Press <OK> to display <CONFIRM?>.

4. Press <OK> to confirm. All entries will be deleted and the display will show

<EMPTY>.

4.9

Find the Handset

You can locate the handset by pressing <PAGE> on the base station. All the

handsets registered to the base will produce the paging tone and show

"PAGING" on the display. You can stop the paging by pressing <TALKON>/

handset is ringing.

<TALK OFF> /<C> on any handset or <PAGE> on the base again.

Note: If there is an incoming call during paging, the phone will ring with the

incoming call instead of paging.

4.10 Make an Internal Call (For users purchased more than 1 set)

This feature is only applicable when there are at least two registered handsets.

It allows you to make internal calls, transfer external calls from one handset to

another handset and make conference calls. If the called handset is not

answered within 60 seconds, the called handset will stop ringing and the calling

handset will return to standby mode.

Note: If only one handset is registered to the base station, when <C/MUTE/INT>

is pressed, it will display

TABLE OF CONTENTS

5 PRIVATE PHONEBOOK ...................................................................................1

5.1 A DD A N EW P HONEBOOK E NTRY ........................................................................... 1

5.2 S EARCH A P HONEBOOK E NTRY .............................................................................. 1

5.3 V IEW A P HONEBOOK E NTRY ................................................................................... 1

5.4 E DIT A P HONEBOOK E NTRY .................................................................................... 1

5.5 D ELETE A P HONEBOOK E NTRY .............................................................................. 1

5.6 D ELETE

ALL PHONEBOOK ENTRIES.......................................................................1

5.7 C HECK THE P HONEBOOK U SAGE .......................................................................... 1

6 CALLER DISPLAY (NETWORK DEPENDENT)...............................................1

6.1 V IEW THE C ALL L IST ................................................................................................. 1

6.2 S TORE A C ALL L IST N UMBER INTO THE P HONEBOOK ........................................ 1

6.3 D ELETE AN ENTRY IN THE C ALL L IST .................................................................... 1

6.4 D ELETE

ALL CALL LIST ENTRIES

................

7 PHONE SETTINGS ...........................................................................................1

7.1 D ATE AND T IME S ETTINGS ...................................................................................... 1

7.1.1 C HANGE THE D ATE F ORMAT ................................................................................. 1

7.1.2 C HANGE THE T IME F ORMAT .................................................................................. 1

7.1.3 S ET THE T IME ........................................................................................................... 1

7.1.4 S ET THE D ATE .......................................................................................................... 19

7.2 A LARM S ETTINGS ......................................................................................................

7.2.1 T URN ON / OFF THE A LARM ..................................................................................... 20

(ONLY AVAILABLE WITH CALLER DISPLAY)

...

...... 1 1

7.2.2 S ET THE A LARM T IME ............................................................................................. 20

................................................................................ 1

7.3 H ANDSET S ETTINGS .................................................................................................

7.3.1 S ET THE R INGER

MELODY

FOR I NTERNAL C ALLS ........................

7.3.2 S ET THE R INGER MELODY FOR E XTERNAL C ALLS ............................................

7.3.3 S ET THE R INGER V OLUME .....................................................................................

7.3.4 S ET A LERT T ONES ...................................................................................................

7.3.5 S ET THE H ANDSET L ANGUAGE .............................................................................

................................................................................... 1

7.3.6 R ENAME THE H ANDSET ..........................................................................................

7.3.7 C HOOSE THE I NFORMATION TO BE D ISPLAYED IN I DLE ...................................

7.3.8 S ET THE A UTO A NSWER ........................................................................................

7.4 B ASE S ETTINGS ........................................................................................................ 22

7.4.

D E - REGISTER A H ANDSET ..................................................................................... 22

7.4.

C HANGE THE DIAL MODE .......................................................................................

........................................................................1

7.4.

C HANGE THE F LASH (RECALL) T IME .....................................................................

7.4.

C HANGE THE S YSTEM PIN C ODE ......................................................................... 23

7.5 R EGISTRATION .......................................................................................................... 24

7.6 R ESET Y OUR P HONE ................................................................................................ 24

TROUBLESHOOTING ...................................................................................

DECLARATION OF CONFORMITY .............................................................

.....................................................................................

GUARANTEE AND SERVICE

Indicates when there are more characters or numbers in front of those

being displayed.

Indicates when there are more characters or numbers after those being

displayed.

Press the MENU/OK key to access the main menu.

Press the MENU/OK key to confirm the current selection.

Press the C/MUTE key to start an intercom call.

(INT)

Press the C/MUTE key to go back to the previous menu level or cancel

(BACK)

the current action.

Press the C/MUTE key to clear a character, stop the alarm, or mute/unmute

the microphone during a call.

3.4

Menu Structure

In idle mode, press <MENU/OK>

to go to CALL LIST, the first option in the menu list.

Press <UP> or <DOWN> to go to other options in the menu list.

Press <OK> to enter a sub-menu or function.

Press <Back> to go back to the previous level.

Refer to the following for the menu structure.

<UP/

Key Press

<MENU>

DOWN>

ringer is switched off.

Main

CALL LIST

PHONEBOOK

SETTINGS

Shows EMPTY

DELETE HS

Sub

or the first Call

or the first

DIAL MODE

List Entry. Then

phonebook Entry.

FLASH TIME

<OK> for:

Then <OK> for:

CHANGE PIN

ADD TO PB

ADD

DELETE

PB STATUS

DELETE ALL

DETAILS

ADD

VIEW

EDIT

DELETE

DELETE ALL

PB STATUS

4.10.1 Intercom Another Handset

1. In idle mode, press <C/MUTE/INT> and all the other registered handset

numbers will display, along with a "9".

2. Enter the number of the handset that you want to call, or enter "9" to call all

handsets.

3. The called handset rings and <TALK ON> must be

pressed on that handset

to establish the intercom call.

Note: If only two handsets are registered to the base station, pressing

<C/MUTE/INT> will call the other handset immediately.

Note: If there is an external call while you are on an intercom call, you'll

hear warning beeps, and you have to end the intercom all, before you can

answer the external call.

4.10.2 Call All Handsets

1. In idle mode, press <C/MUTE/INT> and the registered handsets will display.

2. Press <KEY 9> to ring to all registered handsets

4.10.3 Transfer an External Call to another handset

During an external call:

1. Press <MENU> and <UP/DOWN> to select INTERCOM.

2. Press <OK> to show all the other registered handset numbers, plus "9".

Enter the number for the handset you want to transfer the call to.

3. The external call is put on hold automatically and the called handset rings.

4. Press <TALK ON> on the called handset to establish

an internal call.

5. Press <TALK OFF> on the calling handset or put the calling handset on the

charging cradle to end the current call with the external party.

6. The external call is transferred to the called handset.

Note: If the other handset has not answered the intercom call, you can stop

the intercom and return to the external call by pressing <TALK OFF>

4.10.4 Make a 3-way Conference Call

The conference call feature allows one external call to be shared with two

handsets (in intercom).

The three parties can share the conversation and no additional network

subscription is required.

During an external call:

1. Follow Steps 1 to 4 in section 4.10.3.

"NOT POSSIBLE"

2. Press and hold <STAR> on the calling handset to establish the conference call

Either handset can exit the conference by pressing <TALK OFF>, leaving the

other handset still connected to the external call.

IMPORTANT SAFETY INSTRUCTIONS

When using your telephone equipment, basic safety precautions should always

be followed to reduce the risk of fire, electric shock and injury, including the

following:

1) Read and understand all the instructions.

2) Follow all warnings and instructions marked on the product.

3) Unplug this product from the wall outlet before cleaning. Do not use liquid

cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Keep your Lifestyle 190

0 away from hot, humid conditions or strong sunlight,

and don't let it get wet or u

se this product

near water (for example, near

a bath tub, kitchen

sink, swimming pool).

5) Do not overload wall outlets and extension cords as this can result in the risk

of fire or electric shock.

6) Unplug this product from the wall outlet and refer servicing to our Repair

....................................................... 1

Centre under the following conditions:

• When the power supply cord or plug is damaged or frayed.

• If the product does not operate normally by following the operating instructions.

• If the product has been dropped and the cabinet has been damaged.

• If the product exhibits a distinct change in performance.

7) NEVER use your Lifestyle 190

0 outdoors during a thunderstorm-unplug the

base from the telephone line and the mains socket when there are storms

in your area. Damage caused by l ightning is not covered by the guarantee.

8) Do not use the telephone to report a gas leak in the vicinity of the leak.

....

.................

9) Use only the supplied Battery pack. The operation

periods for the handsets are only applicable with the default battery capacities

10) The use of other battery types or non-rechargeable batteries/primary cells

can be dangerous. These may cause interference and/or damage to the unit

or surroundings. The manufacturer will not be held liable for damage arising

from such non-compliance.

11) Do not use third party charging bays. Damage may be caused to the batteries.

12) Please ensure the batteries are inserted in the correct polarity.

13) Dispose of batteries safely. Do not immerse them in water, burn them, or put

them where they could get punctured.

.............................................................

3.5

Text and Digit Entry Table

The following table shows you where each letter and punctuation character can

be found, by using repeated presses of the alphanumeric keypad. This will be

helpful when storing a name in the phonebook and renaming your handset.

In editing mode, a cursor is displayed to indicate the current text entry position.

It is positioned at the right of the last character entered.

Writing Tips:

1. Once a character is selected, the cursor will move to the next position after a

short pause.

2. You can move the cursor within the text with the <UP/DOWN> keys to

amend the text entry.

3. Press <C> to delete the last character.

4. Press and hold <C> to delete the entire text string.

3.5.1

Latin Cha racter Set

Alphanumeric Editing

(For phonebook name editing and renaming handset )

Key Press 1st

3rd 4th 5th 6th 7th 8th 9th 10th

space

<UP/

DOWN>

DEFAULT

REGISTRATION

SETTINGS

(

)

ALARM

PIN? - - - -

RING SETUP

TONE SETUP

LANGUAGE

RENAME HS

HS DISPLAY

AUTO ANSWER

DATE & TIME

PRIVATE PHONEBOOK

Each handset can store

up to 20 private phonebook entries with names and

numbers. Each phonebook entry can have a maximum of 20 digits for the

phone number and 12 characters for the name. You can also select different

ringtones for your phonebook entries. (Note: the different ringtones only play if

you subscribe to Caller Display and the incoming number matches the stored

number.) Phonebook entries are stored alphabetically by name.

5.1

Add a New Phonebook Entry

In idle:

1. Press <PHONEBOOK> to access the phonebook.

Press <MENU> and <UP/DOWN> to select PHONEBOOK and then press

<OK> to access the phonebook.

2. Press <MENU> to show ADD.

3. Press <OK> and then enter the name.

4. Press <OK> and then enter the number.

5. Press <OK> and <UP/DOWN> to select the desired ringtone for your

phonebook entry.

6. Press <OK> to store the phonebook entry.

5.2

Search a Phonebook Entry

In idle:

1. Press <PHONEBOOK> to access the phonebook.

2. Enter the first letter of the name using the alphanumeric keys(e.g. if it

begins with C, press the 2 key three times),

and then <UP/DOWN> to scroll to the entry you

want.

5.3

View a Phonebook Entry

In idle:

1. Press <PHONEBOOK> to access the phonebook.

2. Press <UP/DOWN> to select the desired phonebook entry.

3. Press <MENU> and <UP/DOWN> to select VIEW.

4. Press <OK> and <UP/DOWN> to review the name, number and ringtone

of the selected phonebook entry.

Note: If the number is more than 12 digits, press <LEFT SOFT KEY> or

<RIGHT SOFT KEY> to view the remaining digits.

Package contents

The package contains the following items:

• 1 Handset

• 1 Base station

• 1 Mains power adapter

• 1 Telephone line cord

• 1 Battery Pack

• 1 User manual

• 1 Warranty card

Note: If you have a Twin, Triple or Quad system, you will also have the requisite

extra handset(s) and batter

ies

, and a charger pod for each extra handset.

3.5.

2 Polish Character Set

Alphanumeric Editing

Number Editing (For phone

Key

(For phonebook name editing and renaming handset)

editing, date/time editing)

Key Press 1st

3rd 4th

5th

6th 7th

8th 9th 10th

0, P (Pause)

3.5.3 Norwegian Character Set

Number Editing (For phone

Alphanumeric Editing

Number Editing (For phone

Key

number editing,date/time editing)

(For phonebook name editing and renaming handset)

editing, date/time editing)

Key Press 1st

3rd 4th

5th

6th 7th

8th 9th 10th

0, P (Pause)

0, or P (Pause) if press and hold

3.5.4 Greek Character Set

Alphanumeric Editing

Number Editing (For phone

(For phonebook name editing and renaming handset)

editing, date/time editing)

Key Press 1st

3rd 4th

5th

6th 7th

8th 9th 10th

Ω

0, P (Pause)

5.4

Edit a Phonebook Entry

In idle:

1. Press <PHONEBOOK> to access the phonebook.

2. Press <UP/DOWN> to select the desired phonebook entry.

3. Press <MENU> and <UP/DOWN> to select EDIT.

4. Press <OK> to display the current name.

5. Edit the name and press <OK>.

6. Edit the number and press <OK>.

7. Press <UP/DOWN> to select the ringtone and press <OK> to confirm.

5.5

Delete a Phonebook Entry

In idle:

1. Press <PHONEBOOK> to access the phonebook.

2. Press <UP/DOWN> to select the desired phonebook entry.

3. Press <MENU> and <UP/DOWN> to select DELETE.

4. Press <OK> to confirm, and the entry will be deleted.

5.6

Delete

all Phonebook entries

1. Press <PHONEBOOK> to access the phonebook.

Press <MENU> and <UP/DOWN> to select DELETE ALL.

Press <OK> to display <CONFIRM?>.

Press <OK> to confirm. All entries will be deleted and the display will show

<EMPTY>.

5.7

Check the Phonebook Usage

You can check how many phonebook entries are stored in your handset and

how many phonebook entries are available for you to store in the phonebook.

1. Press <PHONEBOOK> to access the phonebook.

2. Press <MENU> and <UP/DOWN> to select PB STATUS.

3. Press <OK> to display how much of the phonebook is being used,

for example <14/20> means 14 entries are stored out of the

total

available spaces.