ALCON AT-3000 User Manual - Page 9

Browse online or download pdf User Manual for Cordless Telephone ALCON AT-3000. ALCON AT-3000 13 pages. Long-range cordless telephone

Print Page

STORING A PHONE NUMBER IN THE MEMORY:

Input the phone numbers that you want to store in the memory for fast dialing

such as:

6 6

2707 2766

Press MEM 1 keys to store the phone number to memory 1. It is possible to

MEM

store up to ten numbers from 0-9. If you happen to make a mistake inputting

any of the telephone digits, it is necessary to re-input all the telephone numbers.

FAST DIALING:

Press MEM 1 key to recall the phone number that was stored in Memory 1.

MEM

Then press

key to dial the phone number out, or you can press

2 telephone lines.

HOLDING THE PHONE LINE DURING A CONVERSATION:

Press

key to place the call on hold. Press the

normal operation.

INTERCOMMUNICA TION:

To page the Base Unit and have intercommunication with it, just press the CAL

key and wait for the response. To finish the intercom mode, press the END key.

HANDSET TO HANDSET INTERCOM:

Press FUN CAL to call all the other Handset users for conference use.

FUN

CAL

Press 1-9 CAL to call the Handset you wish to communicate with.

Press any key to talk and continuously press this key during your conversation.

Release the key to listen to the Handset you are communicating with.

FLASH:

When you finish a telephone call, press the

flash function, to retrieve the dial tone and begin to dial the next telephone

if you have

key once again to return to

CAL

END

W . f ? W . ?

? W - X f @ 6 X ?

? 7 Y ? f 7 Y

? @ @ @ f @ @ @ ?

? W . Y f W . Y ?

? 7 @ 1 f @ @ 1 ?

? @ @ @ f @ @ @ ?

? @ f ? W 5 ?

key, which represents the

? @ @ @ f @ @ @ ?

? @ @ @ f @ 0 Y ?

number. The flash time is 0.6 secs.

Another function of the FLASH button is to change the channel if the channel

you are using has too much interference. If the channel you are using during

your conversation has too much interference, press the

and the Handset will automatically change to a different and cleaner channel.

WARNING: It is not possible to transfer a call after you have manually

changed the channel using the above method.

CALL TRANSFER:

If the incoming call received by one Handset user is not for him, the call can be

transferred to the correct Handset user. Press the Handset user number and, this

call will automatically transfer to the Handset User you choose.

NO SVC:

When the "NO SVC" is shown on the LCD screen, it means that you are out of

communication range. Get closer to the Base Unit and try communicating with

the Base Unit again.

FUNCTION KEY EXPLANATION :

FUN

: Key Lock

FUN 5

FUN

: Ring Tone

FUN 6

FUN

: Tone/Pulse

FUN 7

FUN

: Scrambler

FUN 8

FUN

FUN 9

FUN 1

KEY LOCK :

FUN

Press FUN 1 and number 2538 to lock the SND key on the keypad to prevent

FUN

unauthorized use. Take note that both SND 1 and SND 2 will both be locked.

Repeat the same procedure to unlock the SND key. If the SND key is locked it

will be possible to receive incoming calls.

W . f ? W . ?

? W - X f @ 6 X ?

? W . Y f W . Y ?

? 7 Y ? f 7 Y

? @ @ @ f @ @ @ ?

? 7 @ 1 f @ @ 1 ?

? @ f ? W 5 ?

? @ @ @ f @ @ @ ?

button 2 secs

? @ @ @ f @ @ @ ?

? @ @ @ f @ 0 Y ?

: Display ID Code

: Program ID Code

: Encode Function (00-039)

: Set Program Code

: Headphone Volume (1-8)

SND