Alcovisor Jupiter Instruction Manual - Page 8
Browse online or download pdf Instruction Manual for Test Equipment Alcovisor Jupiter. Alcovisor Jupiter 12 pages.
Also for Alcovisor Jupiter: Manual (8 pages), Instruction Manual (12 pages)
P. 6
Standard Test without Input
1. Attach a disposable mouthpiece onto the sample port.
2. Follow steps "3-10" of "Standard Test with Input".
Screening Test
1. Attach a sampling cup onto the sample port.
2. When displays "Please Blow", take a deep breath and blow to the sampling
cup until BEEP tone stops.
3. "Alcohol Detected" or "No Alcohol" displays on the display.
4. A passive test can be performed by select "Passive" during the testee is
blowing.
5. Select
6. If "Alcohol Present", use mouthpiece to perform a standard test to obtain an
accurate test result with reading.
NOTE: Screening Test is only used for screening tests, it is to check whether
alcohol is found in the breath sample. An accurate test result can only be
obtained by standard test.
NOTE: Test records of the screen tests cannot be printed nor stored.
GPS
1. Longitude and Latitude of location of the device will be shown.
2. Longitude and Latitude of the test is stored and printed on the printout.
NOTE: GPS system only functioned 5-10 minutes after turn on the device. It
can only receive signal in open area. If there is no GPS signal, the Longitude
and Latitude will not be shown on the printout.
to start another test.