Alcovisor Jupiter Instruction Manual - Page 9

Browse online or download pdf Instruction Manual for Test Equipment Alcovisor Jupiter. Alcovisor Jupiter 12 pages.
Also for Alcovisor Jupiter: Manual (8 pages), Instruction Manual (12 pages)

Print Page

Setting

1. Auto Off

Select time limit to turn off the device automatically.

Select

ii.

2. Auto Print

Select "Auto Print" to print the result automatically after each test without

selecting "Print".

Select number of printout copies needed for test result equal to 0 ( =0 )

ii.

and exceed 0 ( >0 ).

Select

iii.

NOTE: If no printout is needed for a test result equal to 0, select "0" for

"=0".

3. Cali

When the screen displays "Calibration Needed", send the device for

calibration.

A password is needed for calibration to ensure calibration is performed

ii.

by eligible persons.

Please refer to Calibration Instruction.

iii.

4. Brightness: Adjust the brightness level of screen.

5. GPS

Longitude and Latitude of location of the device will be shown.

Longitude and Latitude of the test is stored and printed on the printout.

ii.

NOTE: GPS system only functioned 5-10 minutes after turn on the

device. It can only receive signal in open area. If there is no GPS

signal, the Longitude and Latitude will not be shown on the printout.

6. Date & Time

Set correct Date and Time.

Select "Update" to confirm.

ii.

to confirm

to confirm.

P. 7