XBOX 360 Consumer Documentation - Page 4

Browse online or download pdf Consumer Documentation for Video Game Controller XBOX 360. XBOX 360 27 pages. With bluetooth
Also for XBOX 360: User Manual (14 pages), User Manual (8 pages), User Manual (10 pages), User Manual (9 pages), Instruction Manual (25 pages), User Manual (14 pages), User Manual (14 pages), User Manual (25 pages), User Manual (2 pages), Disassembly Instruction (2 pages), Quick Manual (2 pages), Quick Start Manual (8 pages), User Manual (31 pages), Manual (7 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), Manual (6 pages), User Manual (2 pages), Manual (2 pages)

Print Page

1. Connect the Xbox 360 Component HD AV Cable connector to the AV port on the console.

2. Set the switch on the AV port connector to regular TV or HDTV. The HDTV position should be

selected if your TV supports high definition resolutions such as 480p, 720p, or 1080i.

3. Connect the color-coded connectors in the video group to the corresponding jacks on the TV: red

to red (red video), green to green (green video), and blue to blue (blue video).

4. Connect the color-coded connectors in the audio group to the corresponding jacks on the TV: red

to red (right audio) and white to white (left audio).

5. Select the appropriate video input on your TV (see "No Picture" under "Troubleshooting" on

page ?? for further information).

See the Xbox 360 Warranty Manual (Volume 2) for information regarding static images and certain

types of TVs.

Other AV Input

You can also connect to additional TV input types by using the Xbox 360 S-Video AV Cable or the

Xbox 360 VGA HD AV Cable (both sold separately). For more information, go to

www.xbox.com/hardware.

Connect to a Digital Audio Optical AV System (Optional)

If your system (typically, a receiver or amplifier) supports digital audio input, you can connect to

digital audio rather than to the standard left and right audio. Digital audio should produce higher-

quality sound.

To connect to digital audio:

1. Connect your video input as described before.

2. Connect your digital audio cable (not included) to the digital audio output on your AV cable and to

the digital audio input on your receiver.

After you've set up your console, you can configure additional console audio settings and test your

connection from the System area of the Xbox Dashboard. Before doing so, proceed through the

steps in the following pages for connecting to power, connecting your controller, and other initial

settings.