XBOX 9Z5-00013 - 360 HD DVD Player User Manual - Page 5
Browse online or download pdf User Manual for DVD Player XBOX 9Z5-00013 - 360 HD DVD Player. XBOX 9Z5-00013 - 360 HD DVD Player 14 pages. User guide
Print Page
To enter a TV code:
1 Turn on your TV and point the remote
toward it.
Press and hold the TV and OK buttons
simultaneously for two seconds. All of the
buttons on the remote will then light up for
two seconds, after which only the numeric
TV buttons (1–12) will stay on.
Enter the code for your TV.
4 Press the TV button again to save the code
and exit. All of the buttons on the remote
will blink three times to confirm your
selection.
To scan for a TV code:
1 Turn on your TV and point the remote
toward it.
Press and hold the TV and OK buttons
simultaneously for two seconds. All of the
buttons on the remote will then light for
two seconds, after which only the numeric
TV buttons (1–12) will stay on.
Press the CH/PG button to send a series of
off commands to your TV. Repeat until the
TV turns off.
NOTe
Give your TV enough time to respond to
the off command each time the button is
pressed. Some TVs take more time to react
to off commands than others.
4 Press the TV button to save the code and
exit. All buttons on the remote will blink
three times to confirm the code.
NOTes
• After 30 seconds of inactivity, the remote
will exit the TV programming mode.
Pressing any button besides 0–9 or CH/PG
returns the remote to its original settings.
• If, after setting the TV code, you find
that the remote is not functional or has
incomplete or inaccurate functionality, try
a different code for your TV manufacturer
or scan for another code. To scan for
another code after the TV turns off in
step 3, turn the TV back on, then continue
to press CH/PG for other codes prior to
proceeding to step 4.
• The universal remote works only with TVs,
the Xbox 360 HD DVD Player, the Xbox 360
console, and Windows Media Centre–
based PCs. It does not control VCRs, DVRs,
other DVD players, or audio equipment.