Xerox 4250 - WorkCentre - Copier Quick Use Manual - Page 20

Browse online or download pdf Quick Use Manual for Printer Xerox 4250 - WorkCentre - Copier. Xerox 4250 - WorkCentre - Copier 42 pages. A4 black and white multifunction system
Also for Xerox 4250 - WorkCentre - Copier: Features (1 pages), Specifications (8 pages), Evaluator Manual (16 pages), Supplementary Manual (1 pages), Brochure & Specs (4 pages), Evaluator Manual (16 pages), Specifications (4 pages), Secure Installation And Operation (4 pages), Service Manual (13 pages)

Xerox 4250 - WorkCentre - Copier Quick Use Manual

Installing Option Kits

This section provides instructions on how to install and configure optional features:
Network Accounting
Server Fax
NOTE:
For more instructions on installing and configuring Server Fax and Network
Accounting, refer to the System Administration CD.
Installing Option Kits
All the Option Kits are installed in the same way. Each kit will contain a Feature
Enablement Key and instructions.
1
With the machine switched on, insert the
Feature Enablement Key into the Card Reader
slot at the right hand side of the machine.
Indicator lights on the Feature Enablement Key
will highlight (first red, blinking green and then
solid green).
2
When the feature is successfully installed a pop-
up message will tell you that the feature is
configured and ask you to remove the Feature
Enablement Key.
Network Accounting
Network accounting provides the ability to manage usage of the machine with
detailed cost analysis capabilities.
Print, Scan, Fax and Copy jobs are tracked at the machine and stored in the job log.
Users must enter their User ID and Account ID to access the machine and
information about the numbers of jobs performed is recorded in a job log.
Installing the kit
Install the kit. Refer to Installing Option Kits on page 16.
Enable Network Accounting
1
Press the Log In/Out button on the Control Panel, enter the Administrator's
Password [1111] and select Enter.
2
Press the Machine Status button then select Tools > Accounting > Accounting
Enablement > Authentication Mode.
3
Select the On button under Network Accounting header.
4
Select Save.
5
Press the Log In/Out button and select Confirm to logout.
NOTE:
Refer to the System Administration Guide for more information.
16
Card Reader slot
quick use guide