Xerox 5400DX - Phaser B/W Laser Printer Quick Install Manual - Page 15

Browse online or download pdf Quick Install Manual for Printer Xerox 5400DX - Phaser B/W Laser Printer. Xerox 5400DX - Phaser B/W Laser Printer 40 pages. 1000-sheet stacker
Also for Xerox 5400DX - Phaser B/W Laser Printer: Technical Instructions (5 pages), Manual (11 pages), Installation Instructions (2 pages), Paper Manual (2 pages)

Print Page

Xerox 5400DX - Phaser B/W Laser Printer Quick Install Manual

23.

If your print job did not print, see the Troubleshooting section for

your operating system in the Advanced Features and

Troubleshooting Manual to correct the problem.

Note

Printers connected to a Windows NT network with the

TCP/IP protocol enabled, can use a web browser to monitor

and configure your printer. Refer to the section in this

document entitled Internet Printer Services.

Note

For installing or managing multiple printers on a Windows

NT network with the TCP/IP protocol enabled, you can use

the Xerox CentreWare MC snap-in to Microsoft Management

Console. Refer to the Xerox CentreWare MC User Guide.

Quick install steps (Xerox TCP/IP Port Monitor)

Insert your printer's CD-ROM into your computer's CD-ROM

drive. A CD Navigator Utility should automatically start. If it does

not start, then:

Click Start and Run.

In the Run window, type: <CD drive>:\SETUP32.EXE.

Select your desired language from the available list.

Printer driver installation

Install the printer drivers for your printer. Within CD Navigator,

select Printer Drivers, and then select Install Xerox Phaser 5400

Laser Printer Drivers.

Note

The Xerox TCP/IP Port Monitor has not been installed yet. It

is necessary to temporarily install the printer drivers to an

alternate port. A local port, such as LPT1, is recommended.

Quick Network Install Guide