Xerox 5400DX - Phaser B/W Laser Printer Quick Install Manual - Page 27
Browse online or download pdf Quick Install Manual for Printer Xerox 5400DX - Phaser B/W Laser Printer. Xerox 5400DX - Phaser B/W Laser Printer 40 pages. 1000-sheet stacker
Also for Xerox 5400DX - Phaser B/W Laser Printer: Technical Instructions (5 pages), Manual (11 pages), Installation Instructions (2 pages), Paper Manual (2 pages)
Print Page
Novell NetWare 3.1x, 4.1x, 5.x Networks
Note
If you use NetWare 4.x or 5.x and print using NDPS/NEPS,
Xerox provides a Xerox NDPS/NEPS solution. This is
available from the Xerox web site at:
http://www.xerox.com/officeprinting
Quick setup
1.
Print the Configuration Sheet. Details are in this document in
Appendix A: Print the Configuration Sheet.
Check the Configuration Sheet and verify that Novell enable=On
2.
and correct Frame Type is set.
3.
Install print drivers from your printer's CD-ROM and then install
CentreWare DP from the Printer Management Software CD-ROM
on a Windows-based workstation. Details for this are found in the
Instruction Booklet included with each CD-ROM.
4.
Run the CentreWare DP application and choose Setup Wizard
from the Printer menu. NetWare 3.1x users should select the
bindery server install and follow the Setup Wizard steps. NetWare
4.1x users should select the NDS install and follow the Setup
Wizard steps.
5.
Send a print job to the printer.
6.
Check the print job for print-quality. If print-quality problems
exist, use the print-quality section of your printer's Advanced
Features and Troubleshooting Manual to correct the problem.
7.
If your print job did not print, see the Troubleshooting section for
your operating system in the Advanced Features and
Troubleshooting Manual to correct the problem.
8.
If you want your printer to service more than one queue, proceed
to the next section entitled Advanced Setup.
Quick Network Install Guide
21