Xerox 6180N - Phaser Color Laser Printer Getting Started Manual - Page 28

Browse online or download pdf Getting Started Manual for Printer Xerox 6180N - Phaser Color Laser Printer. Xerox 6180N - Phaser Color Laser Printer 34 pages. Color laser printer
Also for Xerox 6180N - Phaser Color Laser Printer: Installation Manual (34 pages), Specification Sheet (2 pages), User Manual (32 pages), User Manual (28 pages), Install Manual (2 pages), Security Manual (38 pages), Release Note (2 pages), Install Manual (2 pages), Getting Started Manual (37 pages), Manual (34 pages), Manual (34 pages), User Manual (32 pages), Installation And Operation Manual (8 pages), Evaluator Manual (16 pages), Specifications (4 pages)

Print Page

Reset the Xrite Spectrophotometer

Changing the Retain PDL Setting

Perform the following steps to modify the number of PDLs that can

be retained on the DocuSP.

1. On the DocuSP interface, select Setup and System

Preferences. Select the Job Policy tab.

2. Ensure that the setting for Retain PDL files of last 50 jobs is set

as enabled.

3. Select [OK]. Do not restart the system if you are prompted to do

so.

4. In the background, right-click to open the menu. Open a

terminal window.

5. Login as root user.

6. Type: /opt/XRXnps/bin/setretainPDL # and press <Enter>,

where # is a number between 1 and 100. A value of 0

maintains the current setting.

7. Close the terminal window. Restart the DocuSP software.

Perform the following to reset the spectrophotometer:

Ensure that the calibration strip that matches the serial number on

the spectrophotometer is available. If not, order a new one before

continuing.

1. On the DocuSP controller background menu, open a terminal

window.

2. At the % prompt, type:

cd /opt/XRXnps/XRXcalLib/bin

3. From the % prompt, type:

. /resetDTP

This will restore the spectrophotometer to the factory default

settings.

After the reset is complete, follow the standard procedure to

calibrate the spectrophotometer using the Xrite calibration strip.