Xerox 8200B - Phaser Color Solid Ink Printer Networking Setup Manual - Page 28
Browse online or download pdf Networking Setup Manual for Printer Xerox 8200B - Phaser Color Solid Ink Printer. Xerox 8200B - Phaser Color Solid Ink Printer 47 pages. Phaser color printer
Also for Xerox 8200B - Phaser Color Solid Ink Printer: Quick Manual (37 pages), Installation (1 pages), Specifications (4 pages)
Print Page
14.
Click in the Printer Name or IP Address edit box, and type in the IP Address of the printer you
want to use.
15.
Click Next>.
16.
On the Confirmation window, click Finish if the data is correct. If the data is not correct, click
the <Back button to correct any errors.
17.
Insert your printer's Software and Documentation CD-ROM into your computer's CD-ROM
drive and click Have Disk.
18.
Click the Browse button and select the directory containing the Windows 2000 or XP drivers.
19.
Select the *.INF file, then click Open.
20.
The Wizard returns you to the previous dialog. Verify that the path and filename are correct, and
click OK.
21.
At the next dialog, enter a name for the printer and select whether you want that printer to be the
default, and then click Next>.
22.
If the printer is not shared, click Next>. To share the printer, enter a Share Name, check the share
checkbox, and then click Next>.
23.
At the next dialog, it is recommended that you print a test print. Click Next>.
24.
The Completing the Add Printer Wizard window appears. If all the data presented is correct,
click the Finish button. If not, click the <Back button to correct any errors.
25.
Wait for the test print to print. A new dialog asks for confirmation of the test print; click Yes.
26.
Send a print job to the printer.
27.
Check the print job for print-quality. If print-quality problems exist or if the job does not print, see
the Phaser 8200 Color Printer User Guide to correct the problem or access PhaserSMART from
the Troubleshooting tab of your printer driver.
Quick install steps (AppleTalk protocol)
1.
At the Desktop, right-mouse-click the My Network Place icon and select Properties.
2.
Right-click the Local Area Connection icon inside the Network and Dial-up Connections
window. Select Properties.
3.
Select the General tab, and verify that AppleTalk Protocol is loaded.
4.
If the AppleTalk software is not present, install it using the documentation provided by Microsoft,
and then return to this document.
5.
Open the Control Panel and double-click the Printers icon.
6.
Double-click Add Printer; the Add Printer Wizard starts.
7.
Click Next>.
8.
Click the Local Printer radio button.
9.
Click Next>.
10.
Click the Create a New Port radio button.
11.
Select the AppleTalk Printing Devices from the New Port Type pull-down menu.
12.
You are now presented with a list of zones discovered on the network. Double-click the Zone
Name your printer is on to expand the list. Now select your printer from the list, and click OK.
Phaser® 8200 Color Printer
Windows 2000/XP Network
23