Direct IP Idis DR-6200P Series Quick Manual - Page 8
Browse online or download pdf Quick Manual for Network Hardware Direct IP Idis DR-6200P Series. Direct IP Idis DR-6200P Series 17 pages.
Print Page
- Mode: Select the scan mode.
- Advanced Setup: If the camera is networked but
not scanned, use this setup. This setup allows you to
change the network setting of the NVR's VIDEO IN
port which is camera's network environment. Check
the camera's network setting first before you use this
setup. Make sure that this setting does not conflict
with the WAN setting. For more information on the
WAN setting.
1
Select Scan to commence scanning.
2
Select a camera from the scan list and then select Add
Camera. The Device Login window will appear.
3
Enter a User ID and a Password for the selected
camera.
● Camera list: By using the camera information file, .csv,
the user can register the cameras easily.
Camera View Buttons
● ALIGNMENT
Button: Realigns camera screens
displayed on the video display area in the order of Video
In port connections.
● RESET
Button: Refreshes the video display area and
the camera list.
● TOOL
Button: Displays network camera tool window
and changes the camera protocol.
Camera List Area
Following options can be accessed by right-clicking on a
camera list entry:
● Add/Remove Camera: Adds or removes the selected
camera. The Add Camera option is inactive if the camera
has already been added to the screen.
● Authentication: Enter the necessary camera login info.
This option is inactive for DirectIP™ cameras because
they do not require logins.
Video Display Area
Left-click on the video display area to toggle between split
screen and single screen modes.
Drag the camera screens around to rearrange them. The
maximum number of the channels that can be registered
on the NVR and the current registered camera channels
display on the upper left corner of each screen.
8
Apply/Cancel Buttons
While in Camera Registration mode, select Apply to register
all changes. When selecting Apply, the message will be
displayed. You can activate or deactivate Self-diagnosis.
Select Cancel to exit Camera Registration mode without
applying the changes.
It is not possible to register a camera that has already
been registered to a different NVR.
Diagnosis Process
When the camera is registered to the NVR, Self-diagnosis
runs automatically for the new registered and changed
cameras. If Self-diagnosis is processing, Diagnosis
Processing message will be displayed.
If Self-diagnosis is failed, Diagnosis Requirement
message will be displayed. In this case, you can run Self-
diagnosis manually.
Login
Configuring the NVR's settings and accessing its searching
and other functions require an authorized user login.
1
Bring up the Live menu and either press the Setup
button on the remote control or click on
using the mouse.
2
Select a user, enter the password, and then select OK.
(Log in)