16. When the Confirmation window appears, click OK.
17. When the Add Printer Wizard prompts for the printer model, select SplashM v1.0,
then click Next.
18. When the Installation Successful window appears, click Finish.
19. After successfully installing the printer, the Add Printer Wizard may ask if you want
your system to use this printer as the default printer. Select the desired option (Yes or
No), then go to Section 5.6.3, on page 40 to setup the printer.
1. Logon to the workstation as a local administrator.
2. If there are no other PostScript printers installed on the workstation, install a dummy,
local, PostScript printer from your operating system install media:
a. Start the Add Printer Wizard by clicking on Start, Settings, Printers and Add
Printers.
b. When the Add Printer Wizard prompts for My Computer or Network Printer
Server, select My Computer and click Next.
c.
Follow the prompts. When Add Printer Wizard prompts you for the
Manufacturer and Model of the printer, choose HP and HP LaserJet III Si
PostScript. This copies the non-U.S. English, printer driver software to your
system.
3. Insert the Splash CD-ROM that shipped with the color server into your client
workstation's CD-ROM drive.
4. Open the WINVIEWER folder on the CD-ROM.
5. Double-click on Setup. When Setup starts, a dialog box appears that prompts you to
select a language.
6. Select the English language from the pull-down list and click OK. The Install Shield
Wizard starts.
7. Install the Viewer by following the Install Shield prompts.
8. When the Viewer installation is complete, remove the CD-ROM from the workstation
CD-ROM drive.
9. Start the Add Printer Wizard by clicking on Start, Settings, Printers and Add
Printers.
10. When the Add Printer Wizard prompts for My Computer or Network Printer Server,
select Network Printer Server and click Next.
11. When the Connect to Printer dialog box appears, enter the Windows NT network
path for the Splash M Series Color Server's configured print queue. If the hostname is
splashm and the print queue name is splash_print, the Windows NT network name is
\\splashm\splash_print.
12. Click OK. If the Connect to Printer Warning box appears, click OK.
13. When the Driver Setup window appears, click on Have Disk.
0015647-0001 February 18, 1999
Getting Started Guide
page-39
Print Page