Xerox Phaser 4 400 Driver Installation Instruction - Page 4

Browse online or download pdf Driver Installation Instruction for Printer Xerox Phaser 4 400. Xerox Phaser 4 400 6 pages. Laser printer
Also for Xerox Phaser 4 400: Specification Sheet (2 pages), Paper Manual (42 pages), Specifications (3 pages), Support Manual (27 pages), Setup Manual (24 pages), Service Manual (20 pages), Troubleshooting Manual (48 pages), Evaluator Manual (16 pages), Service Manual (13 pages), Setup And Quick Reference Manual (41 pages), Service Manual (15 pages), Service Manual (9 pages), Maintenance Manual (9 pages), Manual (22 pages)

Print Page

17.

If the printer is not shared, click Next>. To share the printer, enter a Share Name, check the share

checkbox, and then click Next>.

18.

At the next dialog it is recommended that you print a test print. Click Finish.

19.

Wait for the test print to print. A new dialog asks for confirmation of the test print; click Yes.

20.

Send a print job to the printer.

21.

Check the print job for print-quality. If print-quality problems exist or if your job did not print,

refer to the Troubleshooting Guide on the Interactive Documentation CD-ROM to correct the

problem or access PhaserSMART from the Troubleshooting tab of your printer driver.

Xerox TCP/IP Port Monitor

The Xerox installer for Windows automatically installs Xerox TCP/IP Port Monitor for those

installations using the PCL driver. The Xerox TCP/IP Port Monitor can be used to add or remove TCP/

IP ports.

Adding a port using Xerox TCP/IP Port Monitor

To add a TCP/IP port, open the Printer Properties dialog box for the printer you would like to

attach the new TCP/IP port.

Click Start, scroll to Settings, and click Printers.

Click your right-mouse button on the printer to which you want to attach the new TCP/IP

port, and select Properties.

Select the Details tab, and click the Add Port button.

In the Add Port dialog box, select Other.

From the list of available printer port monitors, select the Xerox TCP/IP Port, and then click the

OK button.

At this point, you enter the Xerox TCP/IP Printer Port Wizard. The wizard guides you step-by-

step through the following procedures:

Choosing a name for the new port.

Identifying a printer by its DNS Name or IP Address.

(Alternatively) Identifying a printer using the automatic Printer Discovery feature. Click

Next to proceed with the port installation.

The wizard verifies the port name and printer address, and automatically configures the remaining

port settings for you. Any errors detected in printer identification displays a dialog box requesting

Additional Information. In the Add Xerox TCP/IP Port window:

Under Enter a Port Name, enter a unique name for the port being added.

Under Enter a printer name or IP address, enter the printer's host name or IP Address.

Click Next.

Note

To locate Xerox printers on your local area network, select Auto Printer Discovery, and

then click Refresh. The Xerox TCP/IP Port Monitor searches the network for Xerox printers

and displays them in a list. Select your desired printer from the list and click OK.

Phaser™ 4400 Laser Printer

Windows NT 4.x Network