Xerox Phaser 8400 User Safety - Page 4

Browse online or download pdf User Safety for Printer Xerox Phaser 8400. Xerox Phaser 8400 5 pages. Quick exchange printer
Also for Xerox Phaser 8400: Competitive Comparison (2 pages), Quick Reference Manual (11 pages), Review Manual (16 pages), Setup Manual (2 pages), Accessories Manual (22 pages), Installation Manual (5 pages), Brochure & Specs (4 pages), Quick Reference Manual (11 pages), Quick Reference Manual (11 pages), Service Manual (13 pages), Installation Manual (9 pages), Service Manual (30 pages), Manual (14 pages), Quick Start Manual (6 pages), Manual (5 pages)

Print Page

Moving the Printer

Caution

Parts of the printer may be hot. To avoid personal injury or damage to the printer, allow

30 minutes for it to cool before moving or packing the printer. This allows the ink to

solidify.

■

Always allow the printer to cool before it is moved to avoid ink spills which can damage

the printer.

■

Use the Fast Shutdown mode at the front panel

best results.

■

Never move the printer if you receive a

at the printer's front panel. This message means the printer is not ready to be moved. If the

printhead is not locked, the printer can be damaged during shipment.

Always look at the green flag in the exit tray to ensure that it is in the raised position.

■

When the green flag is raised the printhead is locked.

Always turn off the printer using the power switch, located under the interface cover on

■

the right side of the printer, and unplug all cables and cords. Do not turn off the printer by

pulling the power cord or using a power-strip with an on/off switch.

■

The printer is heavy and must be lifted by two people. The illustration below shows the

proper technique for lifting the printer.

(Shut Down for Moving

Power Down Error-Head not Parked

28 kg

60 lbs.

Phaser® 8400 Color Printer

A-4

Appendix A

Printer) for

message

8400-099