Xerox Wide Format 7742 User Manual - Page 15

Browse online or download pdf User Manual for Printer Xerox Wide Format 7742. Xerox Wide Format 7742 24 pages. Scan solution

Print Page

9. With both hands grasp each side of the Scanner Lid and lower it while depressing

the lid latches on the underside of either end. Ensure that each side clicks into the

locked position by pressing firmly on both ends.

10. Replace the Power Cord to restore power to the scanner.

11. Press the On/Off switch behind the scanner to turn it to the On position.

Note

Ensure the areas are fully dry before scanning.

Scanner Setup

The Contact Image Sensor (CIS) can be sensitive to variations in room temperature. For

best results, the scanner should be normalized on a regular basis. Normalization should

be performed whenever image uniformity is visibly changing across the sensor boundaries.

This can happen when the scanner is first installed or if the scanner is exposed to a

temperature change. The scanner should also be normalized after cleaning it according

to the scanner maintenance procedure. (Refer to

For detailed normalization instructions, see the documentation for the software that

controls the scanner. Generally a System Administrator performs this task. The calibration

target that came with the scanner is used to perform normalization.

Xerox

Wide Format 7742 Scan Solution

User Guide

Cleaning the

Scanner.)

Maintenance

2-5