Xerox WORKCENTRE 5735 Getting Started Manual - Page 5

Browse online or download pdf Getting Started Manual for Printer Xerox WORKCENTRE 5735. Xerox WORKCENTRE 5735 32 pages. Smart card
Also for Xerox WORKCENTRE 5735: Information Manual (50 pages), Datasheet (18 pages), Brochure & Specs (8 pages), Secure Installation And Operation (11 pages), User Manual (8 pages), User Instructions (4 pages), How To Make A Copy (10 pages), Installation Manual (43 pages)

Xerox WORKCENTRE 5735 Getting Started Manual

Device Overview

2
10
1
5
3
6
4
Control Panel: Touch Screen and Numeric
1
Keypad.
Document Feeder and Document Glass: Used
2
for scanning single or multiple documents. The
document glass can be used for scanning single,
bound, custom size or damaged documents.
Paper Trays 1 and 2: These trays are standard
3
on all models. Trays 1 and 2 are fully adjustable
and can be used for media sizes 5.5x8.5" to
11x17"(A5 to A3).
Paper Trays 3 and 4: These trays are high
4
capacity paper trays. Trays 3 and 4 are dedicated
trays used for 8.5x11" or A4 size media.
Bypass Tray: Used for non-standard printing
5
media.
Paper Tray 5: This is an optional high capacity
6
paper tray. It is a dedicated tray used for 8.5x11"
or A4 long edge feed size media. Optional kits
are available to accommodate 11x17", A3,
8.5x14", 8.5x11" or A4 Short Edge Feed (SEF)
media.
Tray 6 (Inserter): An optional paper tray for use
7
with the High Volume Finisher. It is used to insert
pre-printed sheets into copy sets. It is not part of
the printing process and cannot be used for
imaging.
7
8
9
8
9
10
11
12
13
14
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
11
12
High Volume Finisher: This optional finisher
collates, offsets, stacks and staples your output.
Booklet Maker, Tri-fold and Hole Punch kits can
be installed with this finisher.
Booklet Maker and Trifolder: These are optional
devices which can be installed with the High
Volume Finisher to staple and fold booklets or
leaflets.
Convenience Stapler: This optional device
provides manual stapling of up to 50 sheets. The
Convenience Shelf must also be fitted.
Offset Catch Tray: Delivers output collated or
uncollated. Each set or stack will be offset from
the previous to enable easy separation.
Basic Office Finisher: This optional device
stacks, collates, staples and offsets your output.
Office Finisher: This optional device stacks,
collates, staples and offsets your output. Hole
punch kits are also available for this finisher.
Document Glass Cover: This is a flat hinged
cover for the document glass. It is fitted instead
of the document feeder and is standard on some
configurations.
Device Overview
13
14
11
Getting Started