Xerox WorkCentre Pro C3545 Quick Start Manual

Browse online or download pdf Quick Start Manual for Printer Xerox WorkCentre Pro C3545. Xerox WorkCentre Pro C3545 2 pages. Entering local terminal information
Also for Xerox WorkCentre Pro C3545: Reference Manual (4 pages), User Manual (19 pages), Supplementary Manual (3 pages), Quick Start Manual (4 pages), Product Safety Data Sheet (2 pages), Evaluator Manual (20 pages), Quick Start Manual (4 pages), Quick Start Manual (6 pages), Quick Start Manual (4 pages), Quick Start Manual (4 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), Quick Start Manual (4 pages)

Print Page

Note 1: This is a suggested testing procedure that requires

a working knowledge of DOS, and a program called

"Telnet.exe" or "Telnet.com".

Note 2: If the echo function of your telnet program is not

enabled, you will not see what you type at the DOS

command prompt. Please type slowly and carefully.

Fig. 1

Fig. 2

Open a DOS Command Prompt window.

Fig. 3

At the Command Prompt on the DOS screen type: "telnet" the

address

of the SMTP server with port number "25". Then press

Enter. The entry should display as in this figure.

Fig. 4

If you receive a

Connect

failed, repeat step Fig. 3 again. If it

continues to fail, please contact your IT Administrator or your

Internet Service Provider to obtain a working SMTP Server

Address.

SMTP Server Verificaton - 1 of 2

Fig. 5

If you receive a

ready

message similar to the one in this figure,

continue to the next step.

Fig. 6

Type

"ehlo

your e-mail

domain

name" and press Enter.