Xerox XES Synergix 8855 User Manual - Page 8

Browse online or download pdf User Manual for Printer Xerox XES Synergix 8855. Xerox XES Synergix 8855 44 pages. Engineering printer

Print Page

SAFETY NOTES

Your XES 8855 Engineering Printer has been designed and

tested to meet strict safety requirements. These include safety

agency

examination

and

established environmental standards.

Please read the following instructions carefully before operating

the XES 8855 Engineering Printer and refer to them as needed

to ensure the continued safe operation of the product.

Follow all warnings and instructions marked on or supplied with

the product.

Unplug the printer from the wall outlet before cleaning the

exterior. Always use materials specifically designated for the

XES 8855 Engineering Printer. Use of other materials may

result in poor performance and could create a hazardous

situation.

Do not use aerosol cleaners. Follow the instructions in this

operator manual for the proper cleaning methods.

Never use supplies or cleaning materials for purposes other

than what they were intended. Keep all supplies and materials

out of the reach of children.

Do not use this product near water, wet locations, or outdoors.

approval

and

compliance

This product is equipped with a three-wire, grounding-type plug

(i.e., a plug having a grounding pin). This plug will only fit into a

grounding-type power outlet. This is a safety feature. To avoid

the risk of electric shock, contact your electrician to replace the

receptacle if you are unable to insert the plug into the outlet.

Never use a ground adapter plug to connect the printer to a

power source that lacks a ground connection terminal.

This product should be operated from the type of power source

indicated on the marking label. If you are not sure of the type

of power available, consult your local power company.

The power supply cord is the disconnect device for this

equipment. Make sure that the installation is near the socket

outlet and is easily accessible.

Do not allow anything to rest on the power cord. Do not locate

the printer where someone will step on the cord.

(continued)