job is being processed by the device. Depending on the type of job being processed by the device, one of the
following Pause windows should be displayed as appropriate to allow the user to determine whether to delete or
continue processing of the job: Scanning Pause window, Printing Pause window, Scanning/Printing (Two Jobs)
Pause window, Resume Marking/Incomplete Scan Job Pause window, Marking/Scanning Job Pause window,
Build Job/No Marking Pause window, Build Job/ Marking Pause window, Build Job Sample Printing/ One
Segment Scanned Pause window or Build Job Sample Printing/More Than One Segment Scanned Pause
window.
•
Job Details (Completed Jobs) - Allows a user to view the details of a selected completed job. It is accessible by (1)
selecting the {Job Status} hard button on the machine, (2) selecting the {Other Queues} button on the displayed
Job Queue window, (3) selecting the desired Completed job queue from the three such "Completed" job queues
available, and then finally (4) selecting the desired job from the displayed "Completed" Job Queue window.
14. The following page is available from the Web User Interface to a WorkCentre™ 4150 with no System Administrator login
and authentication required:
•
Index – Provides a user with hyperlink pointers to each Web User Interface screen. It is accessible by selecting the
Index button on the top of every Web User Interface page.
15. The following security page is available from the Web User Interface to the WorkCentre™ 4150 with System Administrator
login and authentication. This page provides additional system functional capability:
•
Remote Network Debugging - Allows the system administrator to enable and configure remote network debugging of
the device when problems are detected. Is accessible by typing http://{IP
1
Address}
/properties/Security/TraceTracking/DebugTrackingTool.dhtml.
16. The WorkCentre™ 4150 provides the ability to enable one-off features through the device's Local UI, behind Tools access. A
user can reach the one-off features via the following path: ACCESS – TOOLS – MORE – MORE – SFO.
•
The SFO (Special Feature Option) is intended for specific customer requests that do not represent baseline device
behavior and is not designed for general use.
•
A customer request is developed as a software patch and assigned a specific SFO #. Once implemented, the
customer that requested the Feature is informed of the specific number and is enabled by the SA.
•
These SFO's cannot be changed by anyone other than the SA or a person designated by the SA who has Local UI
access rights.
17. The WorkCentre™ 4150 SA CD1 contains 2 errors:
•
The SA CD1 states in the Installation -- Features -- Authentication – Network Authentication Tab that it is
possible to select "NDS (Novell 4, 5, 6)" as an authentication type. NDS Authentication is not supported on the
WorkCentre™ 4150. The only way to set NDS settings is through the Netware Protocol configuration setting in the
WebUI.
•
The SA CD1 states in the Installation – Configure Features – On Demand Image Overwrite – Perform an Image
Overwrite Over the Network Tab that a user can perform an On Demand Image Overwrite via the 'Properties' Tab
on the Web User Interface. The only way for a user to perform an On Demand Image Overwrite is from the
Graphical User Interface on the device.
Contact
For additional information or clarification on any of the product information given here, contact Xerox support.
Disclaimer
The information provided in this Xerox Product Response is provided "as is" without warranty of any kind. Xerox Corporation
disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In
no event shall Xerox Corporation be liable for any damages whatsoever resulting from user's use or disregard of the information
provided in this Xerox Product Response including direct, indirect, incidental, consequential, loss of business profits or special
damages, even if Xerox Corporation has been advised of the possibility of such damages. Some states do no allow the exclusion or
limitation of liability for consequential damages so the foregoing limitation may not apply.
1
{IP Address} is the IP address of the machine
3
Print Page