Xerox CopyCentre C90 User Manual - Page 23

Browse online or download pdf User Manual for All in One Printer Xerox CopyCentre C90. Xerox CopyCentre C90 24 pages. Copycentre / workcentre pro auditron report software
Also for Xerox CopyCentre C90: Quick Start Manual (16 pages)

Print Page

Local and remote COM port Setup Tips

The default selections for the Local Setup port and for the Remote setup port are COM1 and

COM2, respectively. If you are not sure of the correct assignments for your PC, check the

following:

If your computer has a modem

1. Double click My Computer on your PC's desktop.

2. Double click Control Panel.

3. Double click Modems and select Properties. The Port assignment for the modem is then

displayed (COM1, COM2, COM3, or COM4).

If you are going to collect Auditron data remotely, this is the port that will need to be

assigned as the Remote Setup port.

If you are going to collect data locally, examine the connector on your computer's mouse to

determine the type of mouse you have.

A PS/2 mouse has a circular 6-pin connector.

A Serial mouse has a rectangular 9-pin connector.

In the expanded Connection Selection window, select the correct COM ports for Local and/or

Remote Setups:

If you are going to collect data locally, the correct selection for Local Setup is determined as

follows:

• If your mouse is a PS/2 mouse, the correct selection is likely COM1 (if the modem is not

COM1). If the Modem is COM1, the correct selection is likely COM2.

• If your mouse is a Serial mouse, the correct selection is likely COM2 (if the modem is not

COM2). If the modem is COM2, the correct selection is likely COM3.

Notes:

• The Local Setup and the Remote Setup can not be assigned to the same Port.

• If the expanded Connection Selection window is not displayed when trying to check the port

assignments, restart the Auditron Report Software and click on Setup on the Connection

Selection window and the window will expand.