Xerox DC240 - DocuColor 240 Color Laser Release Note
Browse online or download pdf Release Note for All in One Printer Xerox DC240 - DocuColor 240 Color Laser. Xerox DC240 - DocuColor 240 Color Laser 34 pages. Overview of the control panel buttons.
Also for Xerox DC240 - DocuColor 240 Color Laser: Quick Start Manual (2 pages), Hardware Replacement Manual (2 pages), Quick Start Manual (2 pages)
![Xerox DC240 - DocuColor 240 Color Laser Release Note](/uploads/products/server2/7033889/7033889.png)
User
documentation
System software
Copyright 2005 © Electronics for Imaging, Inc.
Customer Release Notes
Fiery Network Controller for DocuColor 250/240,
version 1.0
This document contains information about the Fiery Network Controller for DocuColor
250/240 version 1.0. Before using the Fiery Network Controller for DocuColor 250/240
with version 1.0, make copies of these Customer Release Notes and the Quick Connect Guide
and distribute them to all users.
N
:
This document uses the term "Fiery" to refer to the Fiery Network Controller for
OTE
DocuColor 250/240. The term "copier" is used to refer to the DocuColor 250/240 copier.
Before printing to the Fiery, make sure system software version 1.0 is installed on the Fiery.
To determine this, print a copy of the Configuration page from the copier Control Panel,
as follows:
1 Press the Machine Status button.
2 Touch the Billing Meter/Print Report tab on the touch screen.
3 Touch the Print Report/List option, and then the Network Controller Jobs Report option.
4 Select the System Setting List option.
5 Press the green Start button to print the Configuration page.
You must also install user software version 1.0 onto client computers. For instructions,
see Printing from Windows and Printing from Mac OS .
User documentation available online
For user documentation in all supported languages, including the Customer User Addendum ,
see the following website:
http://services.efi.com/support/vfigs/9019710383/
System software installation
If you install system software from a client computer over the network, and the installation
fails because of connection timeout, exit any applications and disable any virus protection
software and any pop-up blocker on the client computer.
After installing or upgrading software
After upgrading or reinstalling your system software, you must reboot the Fiery.
Part Number: 45045321
10 June 2005