Xerox Document Centre 220ST Getting Started - Page 33

Browse online or download pdf Getting Started for All in One Printer Xerox Document Centre 220ST. Xerox Document Centre 220ST 48 pages. Scanning services

Print Page

Set Up Scanning

1. Enter System Administrator Setups:

2. Access the Scan to File Setups screens and assign the Default

NOTE

The Job Template Pool and Update All Templates options located

on the Scan to File Setups screen are not used in this environment.

3. Assign the Default Repository Path:

NOTE

The DC220/230/332/340ST transfers a scanned file to FTP

Services which can be running on a variety of platforms including a

server or a workstation. The scanned file is transferred to FTP

Services at the location in the platform's file system where FTP

Services is running. Therefore, the Directory Path starts where

FTP Services is running, which could be anywhere in the

platform's file system, not necessarily at the root of the file system.

Companion to Getting Started with Scanning Services

A. Press the [Access] button on the DC220/230/332/340ST

Control Panel.

B. Using the keypad, enter [ #22222] (or the current System

Administrator password) and then press [Enter] on the

Control Panel Touch Screen. You must enter the # character

before entering 22222.

Repository Server:

A. Select [Additional Setups] (if necessary) and select [Scan

To File Setups].

B. Select [Default Repository].

C. Select [TCP/IP].

D. Select [File Server IP Address].

E. Select [Edit] and enter the IP address of the file server that

will contain the user account for the scanner. Select [Save]

when finished.

A. Select [Directory Path] and then select [Edit] and enter the

full path to the directory for the scanner account, starting at

the root of FTP Services. For example:

/(directory name)/(directory name)

Page 3 - 5