Xerox 470 Quick Install Manual - Page 21
Browse online or download pdf Quick Install Manual for Copier Xerox 470. Xerox 470 38 pages. Macintosh driver information
Also for Xerox 470: Information Manual (13 pages)
Print Page
Microsoft Windows NT 4.0 Server (TCP/IP) Quick Install Card
Xerox Document Centre 460/470 ST
k)
If the printer will not be shared, click
Next>. To share the printer, check the
share checkbox, enter a Share Name,
then click Next>.
l)
At the next dialog it is recommended
that you print a test page. Click Finish.
m)
Wait for the Test Print to print. A new
dialog will ask for confirmation of the
test print. If the page printed, click Yes.
If it did not print; run the Printing
Troubleshooter in NT to solve the
problem.
3.
Send a test job to the printer
a)
Check your test job for quality and use
the problem solving section of the
Document Centre 460/470
Reference Guide for resolving print
defects.
b)
If your print job does not print, refer to
the troubleshooting section in the
document entitled Network
Installation and Troubleshooting
Guide to correct the problem.
Go to the workstation and...
1.
Verify that the TCP/IP protocol stack is
loaded.
2.
Use the CentreWare Network Services
CD-ROM to install print drivers. Details for
this are found in the document supplied
with your printer entitled Network
Services Guide.
3.
Connect the printer that you just created to
the shared resource on the server.
4.
Open an application on the workstation
and print a test page to verify operation.
5.
Check your test job for quality and use the
problem solving section of the Document
Centre 460/470 Reference Guide for
resolving print defects.
6.
Repeat this Go to the workstation and...
procedure for each workstation on the
network that will print to the printer.
Page 3