Xerox CopyCentre 275 Supplementary Manual - Page 9
Browse online or download pdf Supplementary Manual for Copier Xerox CopyCentre 275. Xerox CopyCentre 275 20 pages. Tab creation
Also for Xerox CopyCentre 275: Reference Manual (27 pages), Evaluator Manual (27 pages), Quick Manual (21 pages)
Print Page
3
Copying onto tabs
This chapter describes how to copy onto tab stock.
Setup
Refer to the Section 2, Setup on page 3 and:
1
Load the tab stock into the Bypass Tray, Tray 1 or Tray 2
2
Create your tab master pages
Program Inserts
Tab dividers are copied using the Insert feature. This feature enables different types
of stock to be automatically inserted into a set. Up to 40 inserts can be added per copy
set.
Note:
– If your original document contains printed tab dividers that you wish to copy,
– The Insert feature can only be used with 1-1 or 2-2 sided copying and is not
– The Cover feature can also be selected to create a finished document with
– If your original document has more than 70 pages or mixed output
1
From the Basic Copying
screen select either 1 - 1 sided
or 2 - 2 sided copying.
2
Select the paper tray that
contains the stock you want to
use for the body of the
document which should be in
either Trays 3 or 4.
3
Select the Job Assembly tab.
Xerox CopyCentre, WorkCentre, WorkCentre Pro 232/238/245/255/265/275 Tab Supplement
refer to Copying using Build Job on page 12.
available when Auto Paper is selected.
covers front and back and printed tab dividers.
requirements, you will need to use the Build Job feature. Select Job
Assembly > Build Job > On > Save. You will need to split your original
document into segments and program the Inserts feature for each segment.
7