Xerox DocuColor 260 Release Note - Page 5

Browse online or download pdf Release Note for Copier Xerox DocuColor 260. Xerox DocuColor 260 41 pages. Docucolor advanced multifunction
Also for Xerox DocuColor 260: Function Manual (12 pages), User Manual (32 pages), Specifications (8 pages), Evaluator Manual (14 pages), Evaluator Manual (16 pages)

Print Page

Page 5

Point and Print default printer driver

You can specify the type of printer driver (PostScript or PCL) that is installed by the Point and

Print feature in WebTools Configure. Before you change this setting, delete all printer drivers

on client computers (using the Fiery Printer Delete Utility). Otherwise, existing printer

drivers on client computers may become corrupted.

Changing time in setup

For the DocuColor 242/252 and DocuColor 260, changing the date and time on the Fiery

Color Server sets the copier time. (The time on the Fiery Color Server is shown in the header

of reports such as the Job Log and the Configuration page.) If you change the time on the

copier, there is no effect on the Fiery Color Server.

Web Services cannot be disabled in WebTools

The Enable Web Services option cannot be disabled in WebTools Configure. If you disable

Web Services and then reboot the Fiery Color Server, Web Services is once again enabled

automatically. To disable remote access to Web Services, you must block Port 80 on the TCP/

IP Security page.

AppleTalk zones

To set the AppleTalk zone, you must first enable AppleTalk in Network setup. You must wait

a few seconds while the Fiery Color Server searches for all available AppleTalk zones. Once the

search is complete, you can select desired the AppleTalk zone from the list.

There is an approximately 10 second delay between enabling AppleTalk and when the

AppleTalk Zones field populates, depending on the size and configuration of AppleTalk

network.

FTP Proxy Setup

To use the FTP Proxy service, you must first enable FTP Services.

Job Log Setup

You must enable both Auto Print Job Log After 55 Jobs and Auto Clear Job Log After 55 Jobs

for them to function properly. Disabling either one of them results in both features not

working properly.

Error History Report

The Error History Report shows the error "027-741 Job Template Server Connect Fail" each

time the Fiery Color Server is rebooted. This message is triggered as part of the normal

start-up sequence and does not indicate an error condition.