Xerox Wide Format 6204 Installation Manual - Page 6

Browse online or download pdf Installation Manual for Copier Xerox Wide Format 6204. Xerox Wide Format 6204 20 pages. Xerox 6204: supplementary guide
Also for Xerox Wide Format 6204: Release Notes (7 pages), Setup Manual (20 pages), Release Note (23 pages), Release Note (8 pages), Release Note (8 pages), Quick Start Manual (14 pages), Release Note (9 pages), User Manual (36 pages)

Print Page

8. Using the keyboard, enter the Name or IP address assigned to the printer. Click Next.

9. Accept the Device Type=Standard Generic Network Card. Click Next.

10. Click Finish.

11. Click Close.

12. Click Close.

HP-GL/2 Driver Installation

1. Go to the Printers Folder

For Windows 2000: Select Start > Settings > Printers

For Window 2003 or XP: Select Start > Control Panel > Printers and Faxes

Double-click on Add Printer. Click Next.

2. Select Local printer. Uncheck "Automatically detect and install my Plug and Play printer.

Click Next.

3. From "Use the following port:" Choose the port you created for this printer. Click Next.

4. When asked for the printer manufacturer and model, select the Have Disk... button. Then

select the Browse... button and navigate to the directory where the driver has been

unzipped and select the .INF file that corresponds to your printer.

5. Select the printer you wish to install and follow the instructions.

6. If the "Use Existing Driver" screen appears, select "Replace Existing Driver" and click

Next.

7. If this is a server install, share the printer and give it a share name.

8. Reboot the system.

9. Enable or disable bi-directional support in Device options using the checkbox.

The control for bidirectional support is located on the Device Options tab of the Printer

Properties. If Enable bidirectional support is checked, the driver will automatically

communicate with the printer and set the installed media size, finisher type, and Accxes

firmware version. If Enable bidirectional support is not checked, the user must be aware of

those settings and make sure the driver settings match the printer settings.

(Refer to the Xerox Wide Format FreeFlow Accxes Driver Release Notes for file names and

directory structures of the installed driver.)

To change the display units, select the printer icon from the Printers Folder. Choose File >

Properties. Select the Device Options tab. Change the "Display Units" control to your

preference. The currently used Firmware Revision is also listed on the Device Options tab.

Xerox FreeFlow Accxes Drivers & Client Software Installation Guide