Xerox WorkCentre 5632 Installation Manual - Page 34

Browse online or download pdf Installation Manual for Copier Xerox WorkCentre 5632. Xerox WorkCentre 5632 43 pages. Smart card
Also for Xerox WorkCentre 5632: Quick Use Manual (22 pages), Quick Use Manual (38 pages), Quick Start Manual (10 pages), Evaluator Manual (28 pages), Brochure & Specs (8 pages), Specifications (18 pages), Specifications (20 pages), Specifications (19 pages)

Xerox WorkCentre 5632 Installation Manual
Installation

Using the Smart Card

Once the Smart Card has been enabled, each user must insert a valid card and enter their Personal
Identification Number (PIN) on the touch screen. When a user has finished using the Xerox
WorkCentre, they are then required to remove their card from the card reader to end the session. For
instances where a user forgets to remove their card, the machine will end the session automatically
after a specified period of inactivity.
Follow the instructions below to use the Smart Card:
1.
The Authentication Required window may display on the touch screen, depending on your
machine configuration.
2.
Insert your card into the card reader.
3.
Use the touch screen and numeric keypad to enter your PIN and then select Enter.
If the card and PIN are authenticated, access is granted.
If the access attempt fails, refer to
4.
Complete the job.
5.
To end the session, remove your card from the card reader.
The current session is terminated and the Authentication Required window is displayed.
34
Xerox® Smart Card
Installation Guide
Troubleshooting Tips
on page 37.