Xerox 3600B - Phaser B/W Laser Printer Configuration Manual - Page 5

Browse online or download pdf Configuration Manual for Printer Accessories Xerox 3600B - Phaser B/W Laser Printer. Xerox 3600B - Phaser B/W Laser Printer 6 pages. Letter-size black-and-white laser printer
Also for Xerox 3600B - Phaser B/W Laser Printer: Options Manual (1 pages), Installation Manual (2 pages), Letter Of Volatility (1 pages), Quick Use Manual (2 pages), Install Instructions (2 pages), Quick Manual (2 pages), Evaluator Manual (17 pages), Installation Instructions (2 pages), Installation Instructions (1 pages), Firmware Upgrade Manual (1 pages), Update (1 pages), Brochure & Specs (4 pages), Quick Manual (4 pages)

Print Page

The CentreWare Internet Services installation process is now completed.

Note:

If the Accounting feature is enabled, you may be required to enter a user ID and passcode

(if one is set up).

Note:

When your access to CentreWare Internet Services is encrypted, enter "https://" followed by

the Internet address, instead of "http://".

Note:

DHCP/DDNS: Release Registration – Allows DHCP resources to be released when the

machine is powering down. This is a display-only item and shows "Enabled".

IP Filtering

Overview

The IP Filtering is a security feature that allows you to control access to Internet Services. IP Filtering

allows you to prevent unauthorized access by TCP/IP (Transmission Control Protocol/Internet Protocol).

The IP Filtering feature provides security to the machine, by allowing you to register the IP addresses

permitted to communicate with the machine.

Enable IP Filtering

At your Workstation, open the web browser, enter the TCP/IP Address of the machine into the

Address bar.

Press [Enter].

Click on the [Properties] tab.

Click on the [Security] link.

Select [IP Filtering] in the directory tree.

For IPv6 Filtering

Checkmark the [IPv6 Filtering Enabled] box.

Enter the permittable IP Address(es) access to the device in the following IP Address table.

Enter the IPv6 address in form of CIDR convention. Prefix indicates the number of leftmost bits to

be referenced.

For example:

•

2001:DB8:1234:215:215:99FF:FE04:D345 / 128 is used to reference a complete address.

•

2001:DB8:1234:215:215:99FF:FE04:D345 / 64 is used to reference prefix address consisted

of leftmost 64 bits only.

•

2001:DB8:1234:215:215:99FF:: / 80 is used to reference prefix address consisted of leftmost

80 bits only.

Click on the [Apply] button to accept changes.

If prompted, enter the Administrator's User ID [admin] and Password [1111], and click on

[Login].

10. Click on [OK].

Configure IP Settings and IP Filtering

IPv6 Supplement