Xerox 5400DX - Phaser B/W Laser Printer Quick Install Manual - Page 17
Browse online or download pdf Quick Install Manual for Printer Accessories Xerox 5400DX - Phaser B/W Laser Printer. Xerox 5400DX - Phaser B/W Laser Printer 40 pages. 1000-sheet stacker
Also for Xerox 5400DX - Phaser B/W Laser Printer: Technical Instructions (5 pages), Manual (11 pages), Installation Instructions (2 pages), Paper Manual (2 pages)
Print Page
In the Add Xerox TCP/IP Port window:
Under Enter a Port Name, enter a unique name for the port
a.
being added.
b.
Under Enter a printer name or IP address, enter the printer's
host name or IP Address.
c.
Click Next.
Note
To locate Xerox printers on your local area network, select
Auto Printer Discovery, and then click Refresh. The Xerox
TCP/IP Port Monitor searches the network for Xerox printers
and displays them in a list. Select your desired printer from
the list and click OK.
6.
After all the port settings have been configured and verified, a
Completing dialog box appears summarizing all of the settings.
You have the opportunity to change any of the settings by clicking
the Back key. Otherwise, click the Finish key to complete the port
setup.
7.
Click OK to exit from Printer Properties. This completes the
installation of the Xerox TCP/IP Port.
Quick install steps (AppleTalk protocol)
1.
At the Desktop, right-mouse-click the Network Neighborhood
icon and select Properties.
Click the Protocols tab and verify that the AppleTalk protocol has
2.
been loaded.
3.
If the AppleTalk software is not present, install it using the
documentation provided by Microsoft, and then return to this
document.
Open the Control Panel and double-click the Printers icon.
4.
Double-click Add Printer; the Add Printer Wizard starts.
5.
Verify that My Computer is selected and click Next>.
6.
Click Add Port.
7.
8.
Select the AppleTalk Printing Devices and click New Port.
9.
Click Ethernet and select the device.
Quick Network Install Guide
11