Xerox 721 Customer Training Manual - Page 12
Browse online or download pdf Customer Training Manual for Printer Accessories Xerox 721. Xerox 721 50 pages. Software tools
Also for Xerox 721: Operator's Manual (11 pages), Setup Manual (20 pages), Release Note (23 pages), Release Note (8 pages)
Print Page
Help Files Installation
8
In the browser URL box enter http://
followed by the printer's IP address, (for
example, http://13.240.20.38). If you don't
know the printer's IP address, see your
System Administrator or the test print set
produced at the time of your printer's
installation. When the power is switched
on, the controller also sends a test print to
the 721P printer.
6030/6050 WIDE FORMAT printers only:
Configure Remote Printer Page as follows.
Select PRINTER DEFAULTS >
-
UTILITIES > Configure Remote
Printer.
Put in the IP address of the remote
-
printer, and the job queue name of that
printer, where FreeFlow Accxes will
send the print job data to the 6030/6050.
The remote job queue is in the plt (00-
99) format, with an extension letter of t,
c, h, p, v, or NONE. Your choices will
show on the screen, for example:
(plt00t).
An example queue name is
"plt99" when NONE is selected.
Press the Update Remote Printer button
to set your choices.
Select Printer Defaults > Network. Check
that the Subnet Mask, IP Address, and
Gateway settings are correct. These are
needed so that your workstation will be
able to communicate with your FreeFlow
Accxes compliant Scan System and printer.
Do the following to load the help files, so that
you will be able to access them
Click on PRINTER DEFAULTS >
UTILITIES > Install Help Files and the
Install Help Files page will display. If you
entered the printer password from the
Session Setup link on the Main Menu, and
the FreeFlow Accxes Controller has a hard
disk, you can use this page to upload the
Web Printer Manager Tool help files to the
printer's hard disk.
FreeFlow Accxes Software Tools Training Guide