Xerox 8560DX - Phaser Color Solid Ink Printer Supplementary Manual - Page 4

Browse online or download pdf Supplementary Manual for Printer Accessories Xerox 8560DX - Phaser Color Solid Ink Printer. Xerox 8560DX - Phaser Color Solid Ink Printer 26 pages. Phaser 8560 series
Also for Xerox 8560DX - Phaser Color Solid Ink Printer: Evaluator Manual (20 pages), Supplementary Manual (10 pages), Quick Use Manual (5 pages), Letter Of Volatility (1 pages), Installation Manual (2 pages), Instruction Sheet (2 pages), Evaluator Manual (20 pages)

Xerox 8560DX - Phaser Color Solid Ink Printer Supplementary Manual
Scanner Calibration Instructions
Perform the scanner calibration procedure if your scanner, document feeder, or document cover is
replaced. Scanner calibration adjusts the output quality of the front and back pages of 2-sided originals in
relation to each other. This procedure should not be performed as part of normal system operation.
Calibrate the scanner using the Scanner Calibration page that came with your
replacement scanner, document feeder, or document cover. After you begin the
calibration procedure at the control panel, calibrate the scanner using a two-step
process:
The first step scans the calibration page from the document glass. Follow the
steps in the Document Glass section. (For systems without a document
feeder, only use the steps in this section to calibrate the scanner.)
The second step scans the calibration page through the document feeder.
Follow the steps in the Document Feeder section.

Starting the Calibration Procedure

1. On the control panel, press the System button.
2. Select
, and then press the OK button.
Information
3. Select
Troubleshooting
4. Select
Service Tools
5. Select
Calibrate Scanner
Document Glass
1. Place the Scanner Calibration page on the document glass, with the top edge of the page toward the
left.
Note: Make sure the calibration page is aligned correctly. If the page is misaligned, the calibration
procedure will fail.
Copyright © 2006, by Xerox Corporaton. All Rights Reserved.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button. Continue with the Document Glass steps.
Phaser
www.xerox.com/office/8510_8560support
1 of 2
®
8510/8560MFP
075-1018-00 Rev A