Xerox DocuPrint C3055 Settings Manual - Page 12
Browse online or download pdf Settings Manual for Printer Accessories Xerox DocuPrint C3055. Xerox DocuPrint C3055 33 pages. Internal hard disk
Also for Xerox DocuPrint C3055: Installation Manual (8 pages), Installation Manual (16 pages), Settings Manual (20 pages), Installation Manual (16 pages)
Print Page
2
Setting the ESC/P Mode
2.1
Control Panel Menus
There are two types of control panel menus: the mode menus and common menus. The
mode menus are the menus that relate to the emulation modes. The common menus are
the menus for all the other features of the printer.
Note
• On the DocuPrint C3055, [PostScript] (mode menu) is displayed only if the PostScript software kit
(optional) is installed.
Press the <Menu> button
Common Menu Items for the ESC/P Mode
The common menu items that relate to the ESC/P emulation mode are as follows:
Refer to
• For more information about the common menu items, refer to the 'User Guide'.
Network / Port
To display this item, select [Admin Menu] > [Network / Port].
This item allows you to set the ports to be used in the ESC/P emulation mode.
• Port Status (Parallel/LPD/NetWare/SMB/IPP/USB/Port9100)
Enables the ports to be used in the ESC/P emulation mode. By default, all ports are set
to [Enable].
• Print Mode (Parallel/LPD/NetWare/SMB/IPP/USB/Port9100)
Sets the print mode of each port to [ESC/P] or [HexDump]. By default, all ports are set to
[Auto].
Note
• [Print Mode] allows you to set the method of processing data received from host interfaces. If you set
this to [ESC/P], the printer will not auto-switch languages as described in "Switching Languages
Automatically" (P. 8).
12
2 Setting the ESC/P Mode
Common Menus
Mode Menus
ESC/P
extension
menu items
extension
menu items
extension
menu items
PostScript
extension
menu items
PDF
PCL