Xerox In-line Stapler Finisher User Manual - Page 6

Browse online or download pdf User Manual for Printer Accessories Xerox In-line Stapler Finisher. Xerox In-line Stapler Finisher 36 pages. For document centre color series 50 and docucolor 12

Xerox In-line Stapler Finisher User Manual

Maintenance safety

Do not attempt any maintenance procedure that is not specifically described in the
documentation that is supplied with your In-line Stapler Finisher.
Do not use aerosol cleaners. The use of supplies that are not approved may cause poor
performance of the In-line Stapler Finisher, and could create a dangerous condition.
Use the supplies and cleaning materials only as directed in the DocuColor 12 System
Administration Guide or Document Centre ColorSeries 50 System Administration Guide.
Keep all of these materials out of the reach of children.
Do not remove the covers or guards that are fastened with screws. There are no parts
behind these covers that you can maintain or service.
Do not perform any maintenance procedures unless you have been trained to do them by
a Xerox representative or unless a procedure is specifically described in this guide or one
of the copier/printer manuals.
Follow all warnings and instructions that are marked on, or supplied with, the machine.
Refer to the Safety Notes in the copier/printer user guide for proper placement of the
equipment.
Be careful when working in areas identified with this warning symbol. These
areas may be very hot and could cause personal injury.
If you need any additional safety information concerning the machine or materials, contact
your Xerox representative.
2
IN-LINE STAPLER FINISHER USER GUIDE