Xerox 3812 User Manual - Page 19

Browse online or download pdf User Manual for Software Xerox 3812. Xerox 3812 28 pages. Xerox 3812: user guide

Print Page

IPS Manager operator commands

Xerox DocuSP IPDS User Guide

•

Continuous form emulation: When On, the DocuSP rotates the

DocuSP IPDS output as though it were to be printed on a continuous

form system. For example, letter size pages are rotated for short

edge feed.

If the same application is printed on an IBM 3800 printer, which is a

continuous form printer, and a DocuSP IPDS printer, which is a cut

sheet printer, the output may print in the wrong orientation or extend

off the edge of the page. The page orientation of the IBM 3800

printer is different than most other cut sheet IPDS printers.

♦

For DocuSP IPDS printers and most other cut sheet

printer, the origin is at the top left corner of a portrait

page.

♦ For IBM 3800 printers, the origin is at the top left corner of

the leading edge of the paper.

•

Output queue: Allows you to select the name of the DocuSP printer

queue to be used to process IPDS jobs. The queue must be a

streaming queue. The DocuSP IPS Manager prevents the DocuSP

IPDS server function from initiating a host connection until a valid

streaming queue is selected.

NOTE: Setting overrides for queue attributes that affect the count

of stacked pages may impact correct job recovery. It is important

to avoid sending IPDS jobs to queues with overrides set for

Quantity, Collation, Plex, Pages to Print, Slip Sheets, and

Modulus. Other queue overrides such as Media and Output

Location should also be avoided.

The following operator commands are available while the IPS

Manager is open:

•

Go Online/Go Offline: This command toggles between the online and

offline modes. The IPS Manager does not go online until requested

to do so. This command is only relevant when the Channel has been

selected as the host interface on the System Configuration dialog.

This command is disabled when TCP/IP is the selected host

interface.

•

Stop/Continue: This command toggles the stop and continue modes.

When stop is selected, the IPDS function presents a not ready

condition to the host and all committed pages from the IPDS host

stop printing. Continue presents a ready condition and printing

resumes.

•

Cancel Incoming Job: Tells the host to cancel a job. IPDS jobs

cannot be unilaterally cancelled or deleted from the DocuSP Job

Manager since cancellation or deletion of an in-progress IPDS job

without coordinating the cancellation with the host causes problems

in a DocuSP IPDS AFP printing environment. Using the Cancel

Incoming Job ensures that DocuSP sends a cancel exception to the

host and correctly coordinates the job cancellation with the host.

Using DocuSP IPDS

3-3