Xerox 6100BD - Phaser Color Laser Printer Security Manual - Page 33

Browse online or download pdf Security Manual for Software Xerox 6100BD - Phaser Color Laser Printer. Xerox 6100BD - Phaser Color Laser Printer 38 pages. Disk overwrite installation and usage
Also for Xerox 6100BD - Phaser Color Laser Printer: Installation Manual (34 pages), Specifications (2 pages), User Manual (32 pages), Brochure & Specs (4 pages), User Manual (28 pages), Install Manual (2 pages), Install Manual (2 pages), Release Note (2 pages), Getting Started Manual (37 pages), Manual (34 pages), Manual (34 pages), Getting Started Manual (34 pages), User Manual (32 pages), Manual (11 pages), Installation And Operation Manual (8 pages)

Print Page

Network

Protocol

FTP

SSL

NFS

Secure Print

Security Guide

Access the server via FTP and/or submit jobs from a DigiPath/

FreeFlow client via the Digipath/FreeFlow Print Manager. This

service (ftpd) is shutdown when Xerox FreeFlow Print Server

security is set to high. In FreeFlow v2.0, the client has the ability

to use secure FTP (sFTP) when Xerox FreeFlow Print Server

security is set to high and FTP is not available. Connections

can also be filtered using the IP Filter feature under Setup ->

Security Profiles -> <Any Profile> -> RPC tab.

Required when using the TLS/SSL security feature and/or a

FreeFlow 2.0+ client with Xerox FreeFlow Print Server security

is set to high. Connections can also be filtered using the IP

Filter feature under Setup -> IP Filter.

Necessary when using NFS mounted directories. This service

is disabled when Xerox FreeFlow Print Server security is set to

high. Connections can also be filtered using the IP Filter feature

under Setup -> Security Profiles -> <Any Profile> -> RPC tab.

NOTE: The IP Filtering (Setup->IP Filter) feature can also help in

limiting access to the server. This is the Xerox FreeFlow Print

Server's GUI interface to the SunScreen Lite firewall that is part of

the Solaris 8 Operating System. This feature allows the user to

limit the number of clients who are allowed to access the server

via services such as LPR, IPP, HTTP, HTTPS, SMB Printing, and

FTP. By default, the firewall is disabled (all ports open), but can be

enabled to either only allow specified connections (by IP address,

IP address range, or subnet mask) or to close all ports. For DRW

clients, this mechanism exists under System Preferences ->

Remote Workflow -> "Enable Specified Connections".

NOTE: FreeFlow® v2.0 and newer allows users to select whether

or not the Xerox FreeFlow Print Server server they connecting to

will have high security enabled. If so, the client will use other

communication paths such as sIPP (via SSL) for job submissions

and sFTP for decomposition services (NetAgent).

The MICR mode disables all Xerox FreeFlow Print Server features

that allow additional prints to be produced (such as Sample Print,

Reposition Output, etc.).

Required