Xerox 7700 Service Manual - Page 7

Browse online or download pdf Service Manual for Software Xerox 7700. Xerox 7700 29 pages. Color laser printer
Also for Xerox 7700: User Manual (35 pages), Supplementary Manual (1 pages), Install Manual (42 pages), Setup And Quick Reference Manual (40 pages), Installation Manual (33 pages), Service Manual (17 pages), Setup Manual (2 pages)

Print Page

Laser Components

WARNING:

This printer generates a laser beam as part of the printing

process. The laser beam in this printer is invisible. Direct eye

exposure to the laser beam may cause eye injury or blindness.

To avoid permanent eye damage, follow these directions:

Before starting any service procedure, switch off the printer power and

unplug the power cord from the AC wall outlet.

Do not disassemble the Laser Scanner Assembly.

Use caution when you are working around the Laser Scanner Assembly or

when you are performing laser related troubleshooting or repair

procedures.

Never place a mirror or a reflective tool or object in the laser beam path.

Do not disassemble the printer in such a way that the laser beam can exit

the print engine during a print cycle.

WARNING:

This printer uses heat to fuse the toner image to a sheet of paper.

The Fuser Assembly is very hot. Turn Off the printer power and

wait at least 30 minutes for the Fuser to cool before you attempt

to service the Fuser Assembly or adjacent components.

Make sure covers and panel are in place and that all interlock switches are all

functioning correctly after you have completed a printer service call. If you

bypass, or cheat, an interlock switch during a service call, use extreme

caution when working on or around the printer.

Throughout the printer, warning labels are displayed on potentially dangerous

components. When you service the printer, check to make certain that all

warning labels are in place.

Most importantly, read and obey all posted warning labels.

WARNING:

Turning the power Off using the On/Off switch does not

de-energize the printer. You must remove the power cord to

disconnect the printer from the main power source. Keep the

power cord accessible for removal in case of an emergency.

Phaser 7700 Color Printer Service Manual